

zł22.52 tax excl.
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
This copper alloy traveling nut is intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. This is the same nut that is included with our stepper motors with lead screw.
This copper alloy traveling nut (also known as a carriage nut) features a mounting flange with four holes threaded for M3 screws. It is intended for use with Tr8×8(P2) leadscrews, which are 8 mm-diameter rods with four independent trapezoidal threads spaced 2 mm apart. One full revolution of such a rod will result in a 8.0 mm linear displacement of the traveling nut.
Please note that the nut is not spring loaded, so changes in direction will result in loss of positioning precision due to backlash.
When the nut is prevented from rotating, it travels up or down the rod as the motor rotates
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
No product available!
A set of adapters (adapter) from the motor shaft 6 mm to 12 mm, wheel holders from RC models. Pololu 2687
These 20 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels. Pololu 2686
Coupling for shafts with a diameter of 4 mm. It is made of copper, has a diameter of 12 mm and a length of 18 mm. The set includes 2 pcs. DFRobot FIT523
No product available!
Pololu Universal Aluminum Mounting Hub for 3mm Shaft Pair, 2-56 Holes
Pololu Universal Aluminum Mounting Hub for 5mm Shaft Pair
Flexible shaft coupling with a diameter of 8 mm and 10 mm. It is made of aluminum, has a diameter of 25 mm and a length of 30 mm
Pololu Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack)
This two-part aluminum assembly mounts directly to 6 mm diameter motor output shafts like those on our 37D mm gearmotors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings.
Flexible coupling for shafts with a diameter of 5 mm and 6 mm. It is made of aluminum, has a diameter of 19 mm and a length of 24 mm
Pololu Universal Aluminum Mounting Hub for 3mm Shaft, M3 Holes (2-Pack)
No product available!
A two-piece aluminum adapter for transmitting wheel drive to motors with a 4mm diameter shaft. Mounting screws and set screws included. Pololu 2672
Solarbotics GMW (GM2/3/8/9 Gear Motor Mount - ONE mount)
These 17 mm long aluminum adapters convert a 3 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set includes two adapters, two M4 screws for securing wheels to the adapters, four M3 set screws for securing the adapters to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 8 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.
Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 4 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1081
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688