zł39.00
Stepper motor NEMA23 - unipolar/bipolar, 200 steps/rev, 3.6V, 2A
ID: 210509
zł390.51
Tax included
zł317.49 tax excl.
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
Description
Stepper motor with a resolution of 200 steps/revolution (1.8° per step). Can be used as unipolar or bipolar motor. It is supplied with the voltage of 3.6 V, while the current consumption is a maximum of 2 A per coil. It has a holding moment of 9 kg-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Current consumption per coil: 2 A
- Rated voltage: 3.6V
- The time kept: 9 kg-cm
- Coil resistance: 1.8 Ω (per coil)
- Winding inductance: 2.5 mH per coil
- Shaft diameter: 6.35 mm
- Shaft type: D
- Dimensions: 56.4 x 56 mm (NEMA 23)
- Cable length: 30 cm
- Weight: 700 g
210509
Data sheet
- Shaft diameter
- 6,35 mm
- Resolution
- 200 step/rev
- Torque
- 9 kg-cm
- Coil resistance
- 1,8 Ω
- Coil current
- 2 A
- Inductance of the coil
- 2,5 mH
- Voltage
- 3,6 V
- Weight
- 0,7 kg
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
zł42.45
24h
Available quantity: 3
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8...10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2877
zł49.21
24h
Available quantity: 1
Available
Other products in the same category (16)
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.9 V, and draws a current of 0.6 A per coil. Pololu 1204
zł235.77
24h
Available quantity: 2
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), rated voltage of 3.8 V, and has a current consumption of 0.67 A per coil. Pololu 1205
zł212.88
24h
Available quantity: 4
Available
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2689
zł492.64
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), has a nominal voltage of 7.4 V, and draws a current of 0.28 A per coil. Pololu 1207
zł163.48
24h
Available quantity: 1
Available
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.5 V and draws a current of 2.8 A per coil. 57BYG56-2804S
zł95.69
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a voltage rating of 12 V and draws a current of 1.7 A per coil. 42HB34F08AB
zł51.76
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475
zł412.14
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 2.7V, and draws a current of 1A per coil. Pololu 1209
zł184.96
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 5.4 V, and has a current consumption of 1 A per coil. Pololu 2296
zł350.24
4 weeks
No product available!
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
zł1,225.79
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
zł260.59
24h
Available quantity: 5
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 0.67 A per coil. Pololu 1206
zł242.61
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil
zł53.55
4 weeks
No product available!
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 2.8 A per coil. 57BYGH76
zł134.02
4 weeks
No product available!
NEMA23 bipolar/unipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 36 V and draws a current of 5.6 A per coil. 57HS22
zł190.50
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2 V and draws a current of 1.5 A per coil. 17HD40005-22B
zł35.62
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473