NEMA8 bipolar stepper motor, 200 steps/rev, 4.3V, 0.8A
ID: 588685
zł251.15
Tax included
zł204.19 tax excl.
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
Description
Biplolar stepper motor with a resolution of 200 steps / revolution (1.8 ° per step). It is supplied with the voltage of 4.3 V, while the current consumption is a maximum of 0.8 A per coil. It has a holding moment of 300 g-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Consumption current coil: 0.8 A
- Rated voltage: 4.3V
- Holding time: 300 g-cm
- Coil resistance: 5.4 Ω (per coil)
- Winding inductance: 1.5 mH per coil
- Shaft diameter: 4 mm
- Shaft type: D
- Dimensions: 20 x 20 x 42 mm
- Cable length: 30 cm
- Weight: 80 g
588685
Data sheet
- Shaft diameter
- 4 mm
- Resolution
- 200 step/rev
- Torque
- 300 g-cm
- Coil resistance
- 5,4 Ω
- Coil current
- 800 mA
- Inductance of the coil
- 1,5 mH
- Voltage
- 4,3 V
- Weight
- 80 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133
zł60.10
24h
Available quantity: 1
Available
DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982
zł71.18
24h
Available quantity: 1
Available
Module with a stepper motor driver based on the DRV8825 system. allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage up to 45 V. Pololu 2987
zł67.65
24h
Available quantity: 1
Available
Other products in the same category (16)
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.2 A per coil. OK42HB40-1204A-TJ750
zł57.51
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.6V, and draws a current of 2A per coil. Pololu 1473
zł376.42
4 weeks
No product available!
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 2.8 A per coil. 57BYGH76
zł134.02
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.9 V, and draws a current of 0.6 A per coil. Pololu 1204
zł235.77
24h
Available quantity: 2
Available
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 4.1 V and draws a current of 0.7 A per coil. 17HS4023
zł43.85
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 12 V, and consumes up to 0.5 A per coil. JK42HS40-0504
zł66.67
24h
Available quantity: 9
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 8.6 V, and draws a current of 1 A per coil. Pololu 1477
zł412.14
4 weeks
No product available!
NEMA 17 stepper motor with a resolution of 200 steps per revolution. It is powered by 5.3 V and provides a torque of 27 N-cm. It has a "D"-shaped shaft with a diameter of 5 mm, which facilitates installation and ensures a secure connection with other elements of the system. QSH4218-35-10-027
Regular pricezł334.34zł263.95
24h
Available quantity: 40
Available
Hybrid bipolar stepping motor with integrated 38cm (15″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2690
zł523.57
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a voltage rating of 12 V and draws a current of 1.7 A per coil. 42HB34F08AB
zł51.76
4 weeks
No product available!
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
zł12.85
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476
zł304.18
24h
Available quantity: 1
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 5.4 V, and has a current consumption of 1 A per coil. Pololu 2296
zł422.16
4 weeks
No product available!
NEMA23 bipolar/unipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 36 V and draws a current of 5.6 A per coil. 57HS22
zł190.65
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.5 V, and draws a current of 1 A per coil. Pololu 2298
zł425.72
24h
Available quantity: 1
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256