Stepper motor NEMA17 - unipolar/bipolar, 200 steps/rev, 4V, 1.2A
ID: 195542
zł260.59
Tax included
zł211.86 tax excl.
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
Description
Hybrid stepper motor with a resolution of 200 steps/revolution (1.8° per step). Can be used as unipolar or bipolar motor. It is supplied with the voltage of 4 V, while the current consumption is a maximum of 1.2 A per coil. It has a holding moment of 3.2 kg-cm. The cord is not terminated with any plug.
Features
- Resolution: 200 steps/rev. (1.8° per step)
- Current consumption per coil: 1.2 A
- Rated voltage: 4V
- The time kept: 3.2 kg-cm
- Coil resistance: 3.3 Ω (per coil)
- Winding inductance: 2.8 mH per coil
- Shaft diameter: 5 mm
- Shaft type: D
- Dimensions: 42.3 x 48 mm (NEMA 17)
- Cable length: 30 cm
- Weight: 350 g
195542
Data sheet
- Shaft diameter
- 5 mm
- Resolution
- 200 step/rev
- Torque
- 3,17 kg-cm
- Coil resistance
- 3,3 Ω
- Coil current
- 1200 mA
- Inductance of the coil
- 2,8 mH
- Voltage
- 4 V
- Weight
- 350 g
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
zł41.05
24h
Available quantity: 1
Available
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł47.48
24h
Available quantity: 2
Available
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket. Pololu 2266
zł32.93
24h
Available quantity: 3
Available
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł287.59
24h
Available quantity: 3
Available
Tic T500 USB Multi-Interface Stepper Motor Controller
zł134.39
24h
Available quantity: 1
Available
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
zł37.80
24h
Available quantity: 2
Available
Other products in the same category (16)
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 10 V, and draws a current of 0.5 A per coil. Pololu 1208
zł163.48
24h
Available quantity: 3
Available
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2 V and draws a current of 1.5 A per coil. 17HD40005-22B
zł35.62
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.2 A per coil. OK42HB40-1204A-TJ750
zł57.51
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.2 V, and draws a current of 2.8 A per coil. Pololu 1478
zł546.59
4 weeks
No product available!
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551
zł80.18
24h
Available quantity: 2
Available
NEMA34 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.6 V and draws a current of 5 A per coil. 86A8S4-14
zł451.69
4 weeks
No product available!
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder. The stepper motor itself has a 1.8° step angle and each phase draws 1 A at 3.5 V, allowing for a holding torque of 0.85 kg-cm.
zł1,225.74
4 weeks
No product available!
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 4.1 V and draws a current of 0.7 A per coil. 17HS4023
zł43.85
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 0.67 A per coil. Pololu 1206
zł242.61
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 8.6 V, and draws a current of 1 A per coil. Pololu 1477
zł412.14
4 weeks
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
zł390.51
4 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.5 V, and draws a current of 2.8 A per coil. Pololu 1474
zł390.51
4 weeks
No product available!
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
zł1,225.79
4 weeks
No product available!
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
zł534.89
4 weeks
No product available!
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
zł12.85
4 weeks
No product available!
NEMA 17 stepper motor with a resolution of 200 steps per revolution. It is powered by 5.3 V and provides a torque of 27 N-cm. It has a "D"-shaped shaft with a diameter of 5 mm, which facilitates installation and ensures a secure connection with other elements of the system. QSH4218-35-10-027
Regular pricezł334.34zł263.95
24h
Available quantity: 40
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200