

Stepper motor with a resolution of 200 steps/revolution (1.8° per step). Can be used as unipolar or bipolar motor. It is supplied with the voltage of 7.4 V, while the current consumption is a maximum of 1 A per coil. It has a holding moment of 9 kg-cm. The cord is not terminated with any plug.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
Copper alloy traveling nut intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. Pololu 2688
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
No product available!
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
Tic T500 USB Multi-Interface Stepper Motor Controller
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 5.4 V, and has a current consumption of 1 A per coil. Pololu 2296
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 2.7V, and draws a current of 1A per coil. Pololu 1209
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475
No product available!
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
No product available!
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder. The stepper motor itself has a 1.8° step angle and each phase draws 1 A at 3.5 V, allowing for a holding torque of 0.85 kg-cm.
No product available!
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2689
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 6.3 V, and draws a current of 0.3 A per coil. Pololu 2294
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.2 V, and draws a current of 2.8 A per coil. Pololu 1478
No product available!
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2268
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), has a nominal voltage of 7.4 V, and draws a current of 0.28 A per coil. Pololu 1207
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil. 42BYGHW208
No product available!
A set consisting of a stepper motor driver module based on the ULN2003 system and a stepper motor powered with 5V voltage.
Miniature stepper motor with a 100:1 metal gear offers high precision movement and increased torque, making it a suitable choice for projects requiring precise positioning, such as mobile robots, dispensing mechanisms or laboratory devices. The compact design and wide supply voltage range enable integration in complex mechatronic systems. DFRobot FIT0503
NEMA23 bipolar/unipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 36 V and draws a current of 5.6 A per coil. 57HS22
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472