- Obecnie brak na stanie
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Gray |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
Female Crimp Pins for 0.1" Housings 100-Pack |
Producent
Osoba odpowiedzialna
Brak towaru
Obudowa komputera Raspberry PI (przezroczysta), przeznaczona do montażu płytki prototypowej
Brak towaru
Brak towaru
Brak towaru
Moduł ekspandera portów IO oparty na układzie MCP23008. Idealnie pasuje do wyświetlaczy alfanumerycznych LCD 16x2 oraz 20x4 znaki, stając się konwerterem. Adafruit 292
Brak towaru
Adafruit - 80 - 9V battery clip with 5.5mm/2.1mm plug, RoHS
Brak towaru
Tulejka dystansowa sześciokątna gwintowana typu M3, długość tulejki 6mm, żeńsko-żeńska. Tulejka wykonana z białego poliamidu, Fix&Fasten, RoHS
Brak towaru
Śruba M3x6 z łbem walcowym, długość 6mm, wykonana z białego poliamidu, nacięcie Phillips, Fix&Fasten, RoHS
Brak towaru
Brak towaru
FALOWNIK 1-FAZOWY - ZESTAW DO SAMODZIELNEGO MONTAŻU
Brak towaru
Płytka bazowa dla modułów radiowych Xbee (Digi) należących do rodzin Series 1, Series 2 oraz Pro. Wyposażona w dwukierunkowy konwerter protokołu USB<->UART (FT232RL), stabilizator napięcia 3,3V oraz LED dla linii Power, RSSI oraz DIN/DOUT.
Brak towaru
Brak towaru
BOB-09964 In Fritzing Library - Breakout Board for Electret Microphone
Brak towaru
WRL-10663 OSHW - Evaluation Board for Si4703 FM Tuner
Brak towaru
Brak towaru
Niewielkich rozmiarów moduł z 5 pinami wyprowadzonymi do złącza USB Mini-B. Układ może być dołączony do płytki stykowej lub użyty jako nieregulowane i nielimitowane źródło napięcia 5V i prądu do 100mA. BOB-09966
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Gray