- Obecnie brak na stanie
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Płytka drukowana i zaprogramowany układ do nieskomplikowanego termometra - rejestratora. AVT5573 A
Brak towaru
Brak towaru
Filament firmy ROSA3D wykonany z wysokiej jakości granulatu PET-G. Na szpuli nawinięte jest 0,8 kg filamentu o średnicy 1,75 mm. ROSA3D PET-G Standard Pearl Gold
Brak towaru
Hardware extension adds Wireless M-BUS radio communication capability to Open4, EvoPrimer and STM32 Primer2 platforms
Brak towaru
Brak towaru
PŁYTKA TESTOWA DO KURSU BASCOM AVR MIKROPROCESOROWA OŚLA ŁĄCZKA - ZESTAW ZMONTOWANY I URUCHOMIONY
Brak towaru
Brak towaru
Brak towaru
Obudowa do Odroida C1+ oraz C2 niebieska. Wykonana z trwałego tworzywa sztucznego. Obudowa zawiera otwory na łącze Ethernet, wejścia 4 x USB, microUSB, HDMI oraz łącze DC.
Brak towaru
Taśma służy do ekranowania urządzeń elektronicznych i odprowadzania ładunków elektrostatycznych, samoprzylepna, 50mm x 30m
Brak towaru
Brak towaru
Zmontowany zdalny włącznik dwukanałowy PILOT. AVT5455/1 C
Brak towaru
Brak towaru
Bezprzewodowy kontroler retro z wbudowanym modułem Bluetooth 4.0 oraz wyjściem USB typu C. SparkFun WIG-17264
Brak towaru
Brak towaru
Opaski zaciskowe wykonane są w elastycznego tworzywa sztucznego cechującego się dużą wytrzymałością zarówno mechaniczna jak i termiczną. Lanberg ORG01-BVP300-MC6
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue