- Obecnie brak na stanie
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Brak towaru
BOB-09964 In Fritzing Library - Breakout Board for Electret Microphone
Brak towaru
WRL-10663 OSHW - Evaluation Board for Si4703 FM Tuner
Brak towaru
Brak towaru
Niewielkich rozmiarów moduł z 5 pinami wyprowadzonymi do złącza USB Mini-B. Układ może być dołączony do płytki stykowej lub użyty jako nieregulowane i nielimitowane źródło napięcia 5V i prądu do 100mA. BOB-09966
Brak towaru
Brak towaru
SEN-11486 OSHW - 9 Degrees of Freedom - MPU-9150 Breakout
Brak towaru
Brak towaru
Brak towaru
Shield Arduino przeznaczony do sterowania przewodów elektroluminescencyjnych EL wire. Zawiera obwody pozwalające na bezpieczne włączanie i wyłączanie wysokiego napięcia, co pozwala na tworzenie animowanych wyświetlaczy. Sparkfun COM-10878
Brak towaru
Moduł nadajnika/odbiornika 2,4 GHz oparty o układ nRF24L01+, z którym można się komunikować za pomocą magistrali SPI. Na płytce znajduje się również stabilizator liniowy oraz antena SMD. Sparkfun WRL-00691
Brak towaru
Moduł z sześcioma tranzystorami MOSFET umożliwiający przełączanie sygnałów wysokoprądowych. Zasilanie do płytki dostarczane jest przez złącze komputerowe ATX. Zestaw do samodzielnego montażu. SparkFun DEV-10618
Brak towaru
Brak towaru
Moduł 2-osiowego żyroskopu LPY503AL firmy ST. Po dwa wyjścia analogowe na każdą oś (wzmocnienie 1x i 4x). Zasilanie napięciem 2,7..3,6 V. Wielkość modułu 15 x 18 mm. SEN-11341
Brak towaru
Brak towaru
DEV-10628 - MP3 Player Shield, OSHW In Fritzing Library, SparkFun
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue