The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381

Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290

Power multiplexer based on Texas Instruments TPS2113A. It enables smooth switching between two power sources from 2.8 V to 5.5 V. Pololu 2596

Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 1.1 A. Pololu 4037

A step-down converter module that allows you to reduce the input voltage from 9.2–36V to a stable 9V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows you to power microcontrollers, IoT modules, and other electronics. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5596

A step-down converter module that allows for input voltage reduction from 7.6-36V to a stable 7.5V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5595

A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594

DRV8834 Low-Voltage Stepper Motor Driver Carrier

ACS711EX Current Sensor Carrier -15.5A to +15.5A

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off.

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5259

The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380

High-current XT60 connectors commonly used in the RC hobby industry. They are sold as matching male-female pairs and are great for projects that involve bigger motors and controllers, such as our high-power motor drivers and Simple Motor Controllers. Pololu 2175

Step-down voltage regulator module based on the APM81815 providing a fixed 5 V output at up to 1.1 A with an input voltage range of 5.05 - 72 V. Pololu 5267

Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793

A switching converter that regulates 9V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5584

Pololu high power miniature motor with carbon brushes. 50:1 gear motor, shaft speed 420 rpm, torque 0,54kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2379

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5273

These stackable 0.1" (2.54 mm) female headers are just the right height for connecting  Arduino Uno, Arduino Mega 2560, Arduino Leonardo. The set includes two 1×6 female headers, two 1×8 female headers, and one 1×10 female header, so it has everything necessary for both old- and new-style shields. Pololu 1035

Solarbotics RM2 (high-power motor for GM2/3/8/9)