DRV8434 Stepper Motor Driver - stepper motor driver with DRV8434 system (for assembly)
ID: 1188155
5906623469291
zł46.48
Tax included
zł37.79 tax excl.
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762
Description
Module with a stepper motor driver based on the DRV8434 system. It allows you to power the bipolar motor with a continuous current of up to 1.2 A per phase (up to 2 A with an instantaneous current) and a voltage from 4.5 to 48 V. The system has a built-in stabilizer, so it does not require a separate power supply for the logic part. It can work with 1.8V, 3.3V and 5V systems, which makes it a universal controller for a wide range of applications.
The module uses a popular control interface based on two inputs: STEP, which corresponds to one step of motor rotation, and DIR, which determines the selection of direction. The system offers 11 resolutions from a full step to 1/256 step. The maximum output current is regulated using a potentiometer, which allows it to be limited and protect the motor against damage. The controller has numerous built-in protections, including protection against overheating and overvoltage. It is compatible with popular drivers, including: Pololu with the A4988 chip, so it can also be used in existing projects.
Features
- Supply voltage range from 4.5 V to 48 V
- Current up to 1.2 A continuously per phase without additional cooling (temporary 2 A)
- Built-in stabilizer (no external logic power required)
- It can work directly with 1.8V, 3.3V and 5V systems
- Simple STEP/DIR control interface
- Step resolutions: full step with 100% current, full step with 70% current, 1/2 step, 1/4 step, 1/8 step, 1/ 16-step, 1/32-step, 1/64-step, 1/128-steps, 1/256-steps
- Current regulation using a potentiometer
- Six decay modes, including two intelligent current regulation modes
- Overheat thermal shutdown, overcurrent protection, open load detection, undervoltage lockout and overvoltage protection
- Built-in EMI reduction systems
- Compatible with A4988 stepper motor drivers
- Dimensions: 15.24 x 20.32 mm
Kit contains
- DRV8434A Stepper Motor Driver Module
- Goldpin connector
1188155
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The stepper motor driver with the MP6500 system allows the bipolar motor to be supplied with current up to 1.5 A per phase, without the use of a heat sink. The system can be supplied with voltage in the range 4.5 ... 35 V. Pololu 2966
zł47.98
24h
Available quantity: 1
Available
StepStickBase is a functional base board that provides convenient integration of stepper motor drivers and enables precise microstepping settings
zł4.78
24h
Available quantity: 18
Available
A4988 Stepper Motor Driver Carrier
zł39.05
24h
Available quantity: 1
Available
The stepper motor driver TB6600 supports a voltage of 9 to 40 VDC and a current of 0.5-3.5A, allowing the selection of microsteps from 1 to 32. The device is resistant to environmental conditions such as humidity and shock
zł30.22
24h
Available quantity: 8
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be supplied with current up to 1.2 A per phase and with a voltage from 4.5 V to 45 V. Communication via the SPI interface. Pololu 3766
zł54.74
4 weeks
No product available!
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
zł37.80
24h
Available quantity: 2
Available
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3763
zł50.50
24h
Available quantity: 2
Available
Extension board with stepper motor controller based on the STSPIN820 system. Ideally suited for use, among others in 2D / 3D printers, robots, cameras. Pololu 2878
zł99.24
24h
Available quantity: 1
Available
A stepper motor controller that can operate with a voltage range of 24 to 110 VDC or 18 to 80 VAC and a maximum current of up to 8.4 A. It allows micro step configuration in the range of 2 to 256. 2DM860H
zł193.17
24h
Available quantity: 3
Available
Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo
zł80.98
24h
Available quantity: 1
Available
Module with TMC2208 stepper motor driver. It enables control with a supply voltage ranging from 5.5 to 34 V and a current of up to 1,2 A
zł20.43
24h
Available quantity: 20
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł85.90
24h
Available quantity: 1
Available
Simple to use stepper motor driver, compatible with anything that can output a digital 0..5V pulse or 0..3.3V pulse. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. ROB-12779
zł87.16
3 weeks
No product available!
The BIGTREETECH TMC5160T Pro V1.0 driver enables high-precision control of stepper motors with high current performance in systems powered up to 56 V. Supporting both SPI and SD modes, it features full integration of Trinamic functions and compatibility with popular BIGTREETECH boards, making it ideal for projects requiring silent operation and dynamic control—such as CoreXY 3D printers, CNC systems, or linear axes in automation.
zł60.41
24h
Available quantity: 24
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be powered with a current of up to 1.2 A per phase and can be supplied with the voltage from 4.5 V to 45 V. Pololu 3765
zł58.84
4 weeks
No product available!
Extension module (shield) with a stepper motor driver for Arduino. It allows you to control drives operating with a voltage of up to 40 V and a current consumption of up to 2 A per coil. DFRobot DRI0035
zł149.90
4 weeks
No product available!
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762