zł106.38 tax excl.
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
Distance sensor module based on STMicroelectronics sensor VL53L1X. The sensor used works in time-of-flight technology. The actual measuring range of the sensor is 4-400 cm, while maintaining a resolution of 1 mm. Thanks to the use of laser light in the sensor, distance measurement is reliable and precise. It is also possible to detect hand gestures thanks to a 16x16 measurement matrix. Communication with the sensor and its configuration takes place via the I2C bus. In addition to power pins, communication bus pins, the module also has an input that disables the sensor and the interrupt output. The pads were made in 2.54 mm pitch, which means that the module can be easily connected to a standard universal or prototype board.
There is also a voltage stabilizer on the module board that enables the sensor to be supplied with voltage from the range of 2.6-5.5 V. The sensor requires up to 2.8V to work properly. The built-in regulator can supply other systems in the application. Its performance is 150 mA, the voltage is available on the VDD pin. The technical documentation does not give a minimum distance value for the VL53L1X sensor, while the tests show a minimum limit of 4 cm.
Attention!
The module is also available in a version with a VL53L0X sensor with a range of 3-200 cm.
Manufacturer
Responsible person
The X-NUCLEO-53L0A1 expansion board features the VL53L0X ranging and gesture detection sensor, based on ST’s FlightSense™, Time-of-Flight technology. It is an evaluation board that provides an introduction to the ranging and gesture detection capabilities of the VL53L0X module
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317
Optical distance sensor with the ability to detect multiple objects, 4 m range, I 2 C interface, LGA12 4.9 x 2.5 mm, STMicroelectronics, RoHS
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Distance Sensor Breakout VL53L1X is a distance sensor with a range of 4m and a supply voltage of 2.6 ... 3.5V. Communication with the sensor takes place via the I2C interface. SEN-14722
Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
Laser distance sensor with a measurement range of 0.1 m to 12 m dedicated to indoor use. It communicates via UART or I2C interface. Benewake TFmini Plus Indoor
No product available!
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519
LiDAR laser distance sensor that can scan the environment in two or three dimensions. Offers a range of up to 8 m for 2D measurements and 2 m for 3D measurements. It communicates via the UART interface and can be connected to a computer thanks to the supplied USB adapter. SparkFun SEN-18580
No product available!
Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463
No product available!
Laser distance sensor with a measurement range of 0.3 m to 2 m. It communicates via the UART interface. Benewake TF-LC02
No product available!
LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030
IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560
LiDAR CS20 3D TOF equipped with a ToF image sensor with a resolution of 640 x 480 pixels. It uses ToF technology to record three-dimensional information about objects and space. It can accurately measure distances up to 5 m. DFRobot SEN0579
No product available!
Module with ToF sensor VL53L7CX with an output in the form of a matrix of 64 pixels (8x8) and a range of up to 3.5 m. It communicates via the I2C interface. Pololu 3418
The 3D TOF camera is a module that consists of the BL702 system and the Juyou 100x100 TOF sensor. It is a 3D sensor that allows you to measure distances up to 1.5 meters. It is equipped with a 1.14-inch LCD screen that allows real-time viewing of depth maps along with color maps. DFRobot SEN0581
No product available!
An ultrasonic sensor whose operation is based on the time-of-flight (ToF) principle. In addition to distance information, the sensor also generates an echo energy intensity value useful for distinguishing between different materials or surfaces. Seeed Studio 101021097
VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419
Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415