Adafruit VL53L0X Time of Flight Distance Sensor - a module with a laser sensor

LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030

IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556

Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560

LiDAR CS20 3D TOF equipped with a ToF image sensor with a resolution of 640 x 480 pixels. It uses ToF technology to record three-dimensional information about objects and space. It can accurately measure distances up to 5 m. DFRobot SEN0579

Module with ToF sensor VL53L7CX with an output in the form of a matrix of 64 pixels (8x8) and a range of up to 3.5 m. It communicates via the I2C interface. Pololu 3418

The 3D TOF camera is a module that consists of the BL702 system and the Juyou 100x100 TOF sensor. It is a 3D sensor that allows you to measure distances up to 1.5 meters. It is equipped with a 1.14-inch LCD screen that allows real-time viewing of depth maps along with color maps. DFRobot SEN0581

An ultrasonic sensor whose operation is based on the time-of-flight (ToF) principle. In addition to distance information, the sensor also generates an echo energy intensity value useful for distinguishing between different materials or surfaces. Seeed Studio 101021097

VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419

Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805

Advanced distance sensor with a range of up to 40 m, offering accuracy of ±3 cm and immunity to ambient light up to 100K LUX. With UART and I2C interfaces, the device is compatible with various platforms such as Raspberry Pi and finds applications in robotics, route planning and warehouse detection. Waveshare TOF Laser Range Sensor (D)

Laser ToF distance sensor based on the VL53L1X, providing distance measurements up to 4 m at a ranging frequency of up to 50 Hz. Equipped with a Class 1 940 nm infrared emitter and SPAD receiver, it communicates via the I2C interface. The module operates from a 3.3 V to 5 V supply and comes with a pre-installed 200 mm GH4P cable. Designed for use with the Pixhawk 4 flight controller. Holybro ST VL53L1X Lidar

ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692

Laser radar based on cwToF technology and metasurface lenses, offering depth maps and IR images in 160x60 pixel resolution and a wide viewing angle of 108°x40°. Thanks to its solid-state construction, range up to 4.5 m and resistance to strong lighting (up to 60 Klux), it is ideal for applications such as robotics, obstacle avoidance systems, access control and volume measurement. DFRobot DFR1177

A miniature lidar proximity sensor that detects objects in the range of 1 mm to 300 cm by generating a PWM signal proportional to distance. It operates in the 3-5.5 V range, draws 30 mA, features an ENABLE pin for sleep mode, a 3-pin JST SH connector, and an indicator LED. Its resistance to color, transparency, and lighting makes it ideal for robotics, automation, and contactless interfaces. Pololu 5493

A miniature lidar distance sensor that detects objects up to 200 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (30 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5491

A miniature lidar proximity sensor that detects objects within a range of 1 mm to 130 cm by generating a PWM signal proportional to distance. It operates within a 3-5.5 V range, draws 30 mA, and features an ENABLE pin for sleep mode. It also includes a 3-pin JST SH connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5485