Benewake TFmini Plus is a laser distance sensor with a measuring range from 0.1 m to 12 m. It uses a wavelength of 850 nm and Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect from the object. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor is powered with the voltage of 5 V, it has a casing ensuring the IP65 protection level and uses UART and I2C communication interfaces. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 5 cm and the frequency of measurements up to 1000 Hz. In addition, it is characterized by a narrow measurement angle of FoV 3.6 °, which allows for precise point measurements.
TFmini-i is used in robotics as a measurement sensor in drones and mobile robots.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Integrated circuit - a distance sensor based on the technique of measuring the time between transmitting a light wave and returning its reflection (so-called Time of Flight - ToF). The system transmits data via the I2C bus and can measure distances up to 2 meters. The system has a small size and fits in the Optical LGA12 housing
No product available!
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Laser distance sensor with a measuring range from 0.1 m to 40 m. It has a high accuracy of ± 5 cm and a resolution of 1 cm. Benewake TF02-Pro
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 UART/CAN
No product available!
Cable with USB-UART converter dedicated to TFmini and TFmini Plus distance sensors. Ended with a USB type A plug and goldpin connectors. Benewake USB-Dupon
No product available!
Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793
No product available!
Ultrasonic distance sensor MB1040 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 794
No product available!
The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04
No product available!
No product available!
No product available!
URM04 v2.0 Ultrasonic Sensor
Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS
No product available!
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
No product available!
No product available!
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
No product available!
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus