Benewake TFmini-i is a laser distance sensor with a measuring range from 0.1 m to 12 m. It uses a wavelength of 850 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect away from the subject. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor has been optimized for industrial applications. It offers a wide range of supply voltage from 7 to 30 V, protection against reverse polarity, housing ensuring the level of protection IP65 and industrial RS485 and CAN communication interfaces. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 6 cm and the frequency of measurements up to 100 Hz. In addition, it has a very narrow measuring angle FoV 2°, which allows for precise point measurements.
TFmini-i is used in robotics as a measurement sensor in drones and mobile robots, but also in industry, e.g. as a safety sensor.
Data sheet
Manufacturer
Responsible person
Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus
No product available!
TF Mini LiDAR is a rangefinder based on ToF (Time of Flight) technology. It consists of high-quality optical and electronic devices that ensure stability, high sensitivity and precision. Benewake TFmini-S
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 UART/CAN
No product available!
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042
Ultrasonic distance sensor with a range of up to 5 m with an analog output The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0307
Laser distance sensor with a measuring range up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface
No product available!
Module with laser distance sensor ToF VL53L0X designed for M5Stack sets. It can detect simple hand gestures. M5Stack U010
Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001
No product available!
Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output
An industrial-grade LIDAR laser scanner that allows you to create maps of areas up to 100,000 m². It has a range of up to 40 m and a resolution of up to 5 cm. Equipped with a 9-DOF inertial navigation system
No product available!
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
No product available!
ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776
Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050
Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052
Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054
Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4064
No product available!
Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785
No product available!
A module with a distance and gesture sensor that allows the detection of objects in two axes (x and z) and the detection of simple gestures. It communicates via the I2C or UART interface. SparkFun SEN-13162
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i