zł41.44 tax excl.
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. The sensor is supplied with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). If an object is detected in the range of 2 to 10 cm, the output state is low, otherwise the output state is high. The module will be used in mobile robots to detect obstacles and as a sensor to detect objects, e.g. on a production line. An instruction and a sample program are available on the Wiki page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785
No product available!
Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2
Expansion board equipped with VL6180 distance sensor, based on FlightSense technology. The set is designed to measure distances and detect gestures. X-NUCLEO-6180A1
ToF (Time of Flight) laser distance sensor with built-in MCU and distance measurement algorithm. The sensor can measure up to 5m with an accuracy of ±1.5 cm and a resolution of 1 mm. Waveshare TOF Laser Range Sensor
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
No product available!
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054
IR distance sensor with a range of up to 400 cm. It has a digital output that changes its state when the sensor detects an object. DFRobot SEN0531
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 318 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the USB interface. DFRobot SEN0279
No product available!
Maxbotix XL-MaxSonar-AE0 Sonar Range Finder MB1300
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042