zł86.69 tax excl.
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18993
ToF distance sensor module based on the VL53L4CD chip. Interacts the SPAD matrix (Single Photon Avalanche Diodes) and FlightSense™ technology, which allows you to measure the absolute distance regardless of the color and surface of the detected object. Thanks to the application of the IR transmitter emitting light with a wavelength of 940 nm and a set of filters, it offers a range of up to 1.30 m with good immunity to interference from ambient light. The sensor has a detection angle of 18 ° and uses VCSEL (Vertical Cavity Surface Emitting Laser) which means there is no blind zone and can detect objects very close to the sensor. The module communicates via the I2C interface, and the user has the Arduino and Python libraries at his disposal. It will be used in applications for detecting the presence of objects and obstacles in both industrial robots and mobile structures. Full documentation with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0430
Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
A miniature lidar proximity sensor that detects objects up to 10 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5462
No product available!
Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793
No product available!
No product available!
Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463
No product available!
No product available!
Advanced distance sensor with a range of up to 50 m, offering accuracy of ±3 cm and immunity to ambient light up to 100K LUX. With UART and I2C interfaces, the device is compatible with various platforms such as Raspberry Pi and finds applications in robotics, route planning and warehouse detection. Waveshare TOF Laser Range Sensor (D)
Ultrasonic distance sensor MB1200 with a range from 0 to 765 cm. It generates an output in the form of a pulse, the duration of which is proportional to the measured distance. Pololu 1650
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425
Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785
No product available!
A miniature lidar distance sensor that detects objects up to 5 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5550
No product available!
A miniature lidar proximity sensor that detects objects within a range of 1 mm to 130 cm by generating a PWM signal proportional to distance. It operates within a 3-5.5 V range, draws 30 mA, and features an ENABLE pin for sleep mode. It also includes a 3-pin JST SH connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5485
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 3.5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0283
No product available!
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18993