Maxbotix XL-MaxSonar-EZ0 - ultrasonic distance sensor MB1200 (765cm)

A miniature lidar proximity sensor that detects objects up to 15 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5464

The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04

This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489

Maxbotix XL-MaxSonar-AE0 Sonar Range Finder MB1300

Distance Sensor Breakout VL53L1X is a distance sensor with a range of 4m and a supply voltage of 2.6 ... 3.5V. Communication with the sensor takes place via the I2C interface. SEN-14722

Module with ToF distance sensor based on the VL53L0X system. It offers a range of 3 to 200 cm and communicates via the I2C interface. TOF200C

Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus

ToF laser rangefinder. It enables detection of many objects, has a field of view of about 25 ° and is able to detect objects at a distance of up to 5 m. Communicating via the I2C interface. Pololu 3416

Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT

A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787

LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776

VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419

Ultrasonic distance sensor with a range of up to 5 m with an analog output The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0307

Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 3.5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0283

Ultrasonic distance sensor (sonar) with a measuring range from 25 cm to 1068 cm. It allows you to read data through one of three interfaces: AE (analog envelop), analog output or RS232 interface. DFRobot SEN0280

KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.