zł154.53 tax excl.
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3680
Module with a 3-channel distance sensor based on the OPT3101 chip by Texas Instruments. Unlike conventional infrared sensors, which use the intensity of the reflected light to estimate the distance to an object, the module emits 940 nm infrared light at a frequency of 10 MHz, and then measures the phase (delay) of the reflected signal, which corresponds to the measured distance.

The board has three channels each covering approximately 50° to 60°, giving the sensor a wide field of view (FOV). Under favorable conditions, the sensor can measure objects at a distance of up to 1 m. Distance measurements are available via the I²C interface, which is also used to configure the sensor. The board can be powered with the voltage from 2.5 V to 5.5 V. The stabilizer supplies a logic voltage of 3.3 V to the OPT3101, and the built-in voltage level converter adjusts the I²C clock and data lines to the same logic voltage level as VIN, thanks to which it is easy to connect the board with 3.3V or 5V systems.
Manufacturer
Responsible person
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3412
Laser distance sensor with a measuring range up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface
Module with laser distance sensor ToF VL53L0X designed for M5Stack sets. It can detect simple hand gestures. M5Stack U010
Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001
Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output
An industrial-grade LIDAR laser scanner that allows you to create maps of areas up to 100,000 m². It has a range of up to 40 m and a resolution of up to 5 cm. Equipped with a 9-DOF inertial navigation system
No product available!
Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010
ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776
Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050
Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052
Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054
Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4064
No product available!
Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785
No product available!
A module with a distance and gesture sensor that allows the detection of objects in two axes (x and z) and the detection of simple gestures. It communicates via the I2C or UART interface. SparkFun SEN-13162
No product available!
Ultrasonic distance sensor with a measuring range from 2 to 400 cm. It communicates via a standard interface (Echo, Trigger) or the I2C bus. SparkFun SEN-17777
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. The set includes a module with Qwiic SparkFun SEN-18009 connectors
No product available!
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3680