Qwiic ToF Imager - module with ToF VL53L5CX sensor
ID: 588326
5906623419074
zł170.32
Tax included
zł138.47 tax excl.
Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18642
Description
Module with ST. ToF VL53L5CX sensor. The system integrates the SPAD matrix, physical infrared filters and optical elements (DOE) to achieve good performance in various ambient lighting conditions. The sensor allows you to measure distances up to 4 m in 64 zones with a wide field of view of 63°. The data can be read at up to 60 Hz and thanks to the ST Histogram algorithms, the VL53L5CX is able to detect various objects in the field of view. The module allows you to detect gestures. It is perfect for applications such as room mapping, liquid level detection or AR and VR applications. Full documentation with examples of use is available on the product page.
Features
- Multi-zone output with separate 4x4 or 8x8 zones
- Autonomous low-power mode with programmable interrupt threshold to wake the host
- Range up to 400 cm
- The ability to refresh 60 Hz
- Emitter: 940 nm light-emitting laser (VCSEL) and integrated analog driver
- Detection angle (FoV): 63°
- Voltage: 3.3V
- I2C address: 0x52
- 2 x Qwiic connectors
588326
Data sheet
- Interface
- I2C
- Type of sensor
- ToF
- Minimum distance
- 2 cm
- Maximum distance
- 400 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
zł118.28
24h
Available quantity: 1
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 10
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
24h
Available quantity: 1
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 26
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł12.50
24h
Available quantity: 35
Available
Other products in the same category (16)
Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS
zł87.76
4 weeks
No product available!
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
zł8.45
4 weeks
No product available!
No product available!
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
zł28.75
24h
Available quantity: 2
Available
Available
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
zł163.11
3 weeks
No product available!
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
zł39.00
24h
Available quantity: 262
Available
Available
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
zł151.39
24h
Available quantity: 3
Available
Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207
zł68.19
24h
Available quantity: 4
Available
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
zł74.57
24h
Available quantity: 4
Available
Available
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor.
zł39.52
4 weeks
No product available!
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
zł36.86
24h
Available quantity: 1
Available
Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317
zł97.12
24h
Available quantity: 1
Available
Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18642