TOF400F - module with distance sensor VL53L1X (400cm)

Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780

Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data via an industrial analog interface with a current output of 4-20 mA. DFRobot SEN0267

Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177

Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1

ToF (Time of Flight) laser distance sensor with built-in MCU and distance measurement algorithm. The sensor can measure up to 5m with an accuracy of ±1.5 cm and a resolution of 1 mm. Waveshare TOF Laser Range Sensor

Laser scanner using 360-degree measurement, taking samples at a frequency of up to 16 kHz. It is capable of generating 2D point map information within a 12-meter radius. Seeed Studio 114110128

An ultrasonic sensor whose operation is based on the time-of-flight (ToF) principle. In addition to distance information, the sensor also generates an echo energy intensity value useful for distinguishing between different materials or surfaces. Seeed Studio 101021097

Laser distance sensor with a measuring range of up to 4 m, based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Waveshare VL53L1X Distance Sensor

Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply

Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723

ToF distance sensor (Time of flight) with a range of up to 60 cm. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0429

Ultrasonic obstacle sensor (vehicles) with high resolution and range up to 500cm with USB interface. It allows you to perform measurements at 4Hz. DFRobot SEN0268

Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232

Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm

Module with ToF distance sensor based on the VL53L0X system. It offers a range of 3 to 200 cm and communicates via the I2C interface. TOF200C