

Benewake TF03-180 is a laser distance sensor with a long measuring range from 0.1 m to 180 m. It uses a wavelength of 905 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect off the subject. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor has been optimized for use in industry and in difficult weather conditions. It offers a wide range of supply voltages from 5 to 24 V, housing ensuring IP67 protection level and an interface RS485/RS232. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 10 cm and the frequency of measurements up to 1000 Hz. In addition, it has a very narrow measuring angle FoV 0.5 °, which allows for precise point measurements.
The TF03 is used in robotics as a measurement sensor in drones and mobile robots, autonomous vehicles, but also in industry, e.g. as a sensor for analyzing traffic.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Integrated circuit - a distance sensor based on the technique of measuring the time between transmitting a light wave and returning its reflection (so-called Time of Flight - ToF). The system transmits data via the I2C bus and can measure distances up to 2 meters. The system has a small size and fits in the Optical LGA12 housing
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 UART/CAN
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 Analog
No product available!
Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18642
No product available!
Module with a digital distance sensor with a range of up to 25 cm. It has a digital output that goes low when an object is detected. Pololu 4066
Ultrasonic distance sensor (sonar) with a measuring range from 25 cm to 1068 cm. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0281
No product available!
Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface. TOF050C
No product available!
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3412
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 UART/CAN
No product available!
A miniature lidar proximity sensor that detects objects within a range of 1 mm to 130 cm by generating a PWM signal proportional to distance. It operates within a 3-5.5 V range, draws 30 mA, and features an ENABLE pin for sleep mode. It also includes a 3-pin JST SH connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5485
No product available!
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776
Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238
Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 RS485/RS232