Garmin LIDAR-Lite v4 LED - LIDAR distance sensor (10m) with Qwiic module

VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419

Ultrasonic distance sensor with a range of up to 5 m with an analog output The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0307

Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177

Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001

Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2

DFRobot KIT0019

Module with laser distance sensor ToF VL53L0X designed for M5Stack sets. It can detect simple hand gestures. M5Stack U010

Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1

ToF laser rangefinder. It enables detection of many objects, has a field of view of about 25° and is able to detect objects at a distance of up to 3 m. Communicating via the I2C interface. SparkFun SPX-17072

Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2

Laser distance sensor with a measuring range up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface

Ultrasonic distance sensor MB1242 with a range from 20 to 765 cm. It allows you to read data via the I2C interface. DFRobot SEN0273

Module with a distance sensor with a range of up to 300 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4079

ToF distance sensor (Time of flight) with a range of up to 60 cm. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0429

Ultrasonic distance sensor (sonar) with a measuring range from 15 to 318 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the USB interface. DFRobot SEN0279

Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18642