Qwiic Mini dToF Imager - module with distance sensor TMF8821 (5m)
ID: 1178990
5906623419258
zł99.00
Tax included
zł80.49 tax excl.
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19451
Description
A small, easy-to-use ToF (Time of flight) distance sensor with a range of up to 5 m. It uses a class 1 VCSEL IR laser, SPAD and a TDC converter. It allows for excellent measurement performance in both dark and sunny places. It supports 3x3, 4x4 and 3x6 output and an extra-wide, dynamically adjustable field of view with the ability to detect multiple objects. The minimum measuring distance is 1 cm. The sensor offers two configurable GPIO outputs that can be used to trigger a measurement, enable the sensor or as general purpose inputs and outputs. The TMF8821 is factory calibrated, but if mounted behind plastic or glass, the sensor can be recalibrated. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. Full documentation with examples of use is available on the product page.
Features
- ToF sensor AMS TMF8821
- Direct ToF technology with SPAD detection
- Fast Time-to-Digital Converter (TDC) Architecture
- Detection of distances from 10 to 5000 mm at 30 Hz
- 940nm VCSEL Class 1
- Built-in filter and algorithm to limit the influence of sunlight
- Viewing angle: 63 °
- Interrupt output
- 2 x GPIO
- I2C interface (address 0x41)
- Supply voltage: 2.7 V to 3.6 V
- Current consumption: up to 57 mA
- Dimensions: 1.27 x 2.54 mm
- Two mounting holes
1178990
Data sheet
- Interface
- I2C
- Type of sensor
- ToF
- Minimum distance
- 1 cm
- Maximum distance
- 500 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł12.35
24h
Available quantity: 17
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 9
Available
Other products in the same category (16)
A miniature lidar distance sensor that detects objects up to 50 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5481
zł94.27
4 weeks
No product available!
ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532
zł40.50
24h
Available quantity: 4
Available
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface
zł26.53
24h
Available quantity: 3
Available
Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793
zł248.74
4 weeks
No product available!
Ultrasonic distance sensor with a range of up to 5m. Communication takes place via the I2C interface. The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0304
zł60.26
24h
Available quantity: 1
Available
No product available!
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
zł74.57
24h
Available quantity: 4
Available
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
zł151.39
24h
Available quantity: 4
Available
A module with a distance sensor GP2Y0E03 operating in the infrared band. The sensor measures between 4-50cm.
zł32.84
24h
Available quantity: 9
Available
The Sharp GP2Y0A02YK0F sensor enables precise distance measurement in the range of 20–150 cm using an analog output. Its stable characteristics and ease of integration make it a popular solution in mobile robotics and obstacle detection systems.
zł40.17
24h
Available quantity: 5
Available
Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071
zł101.68
24h
Available quantity: 3
Available
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
zł14.39
24h
Available quantity: 6
Available
Ultrasonic distance sensor module with a range of up to 7.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0313
zł167.65
24h
Available quantity: 4
Available
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
zł8.45
24h
Available quantity: 4
Available
Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i
zł699.00
24h
Available quantity: 1
Available
Laser distance sensor with a range of 5 cm to 15 m. It has a high accuracy of ± 2 cm and a resolution of 1 mm. DFRobot SEN0524
zł202.26
24h
Available quantity: 1
Available
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19451