Benewake TF02-i is a laser distance sensor with a measuring range from 0.1 m to 40 m. It uses a wavelength of 850 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect away from the subject. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor has been optimized for industrial applications. It offers a wide range of supply voltage from 7 to 30 V, protection against reverse polarity, housing ensuring the level of protection IP65 and industrial RS485 and CAN communication interfaces. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 5 cm and the frequency of measurements up to 100 Hz. In addition, it is characterized by a very narrow measuring angle FoV 3 °, which allows for precise point measurements.
TF02-i is used in robotics as a measurement sensor in drones and mobile robots, but also in industry, e.g. as a safety sensor.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Laser distance sensor with a measuring range from 0.1 m to 40 m. It has a high accuracy of ± 5 cm and a resolution of 1 cm. Benewake TF02-Pro
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 Analog
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 RS485/RS232
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 UART/CAN
No product available!
Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply
Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792
Ultrasonic distance sensor with a measuring range from 2 to 400 cm. It communicates via a standard interface (Echo, Trigger) or the I2C bus. SparkFun SEN-17777
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 UART/CAN
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 UART/CAN
No product available!
Mini module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic/STEMMA QT connector and communicates via the I2C interface. Pimoroni PIM622
The PCR radar module is equipped with an integrated antenna and a 26-pin connector compatible with Raspberry Pi. The sensor detects distance, gestures, movement, material and speed up to 2 m. SparkFun SEN-16826
No product available!
Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 645 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the RS232 interface. DFRobot SEN0276
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 3.5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0283
No product available!
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
No product available!
ToF distance sensor (Time of flight) with a range of up to 60 cm. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. DFRobot SEN0429
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
The Sharp GP2Y0A02YK0F sensor enables precise distance measurement in the range of 20–150 cm using an analog output. Its stable characteristics and ease of integration make it a popular solution in mobile robotics and obstacle detection systems.
Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i