Benewake TF03-100 is a laser distance sensor with a long measuring range from 0.1 m to 100 m. It uses a wavelength of 905 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect off the subject. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor has been optimized for use in industry and in difficult weather conditions. It offers a wide range of supply voltages from 5 to 24 V, housing ensuring IP67 protection level and an interface RS485/RS232. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 10 cm and the frequency of measurements up to 1000 Hz. In addition, it has a very narrow measuring angle FoV 0.5 °, which allows for precise point measurements.
The TF03 is used in robotics as a measurement sensor in drones and mobile robots, autonomous vehicles, but also in industry, e.g. as a sensor for analyzing traffic.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 Analog
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 UART/CAN
No product available!
Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
Laser distance sensor with a measurement range of 0.1 m to 12 m dedicated to indoor use. It communicates via UART or I2C interface. Benewake TFmini Plus Indoor
No product available!
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519
LiDAR laser distance sensor that can scan the environment in two or three dimensions. Offers a range of up to 8 m for 2D measurements and 2 m for 3D measurements. It communicates via the UART interface and can be connected to a computer thanks to the supplied USB adapter. SparkFun SEN-18580
No product available!
Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463
No product available!
Laser distance sensor with a measurement range of 0.3 m to 2 m. It communicates via the UART interface. Benewake TF-LC02
No product available!
LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030
IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560
LiDAR CS20 3D TOF equipped with a ToF image sensor with a resolution of 640 x 480 pixels. It uses ToF technology to record three-dimensional information about objects and space. It can accurately measure distances up to 5 m. DFRobot SEN0579
No product available!
Module with ToF sensor VL53L7CX with an output in the form of a matrix of 64 pixels (8x8) and a range of up to 3.5 m. It communicates via the I2C interface. Pololu 3418
The 3D TOF camera is a module that consists of the BL702 system and the Juyou 100x100 TOF sensor. It is a 3D sensor that allows you to measure distances up to 1.5 meters. It is equipped with a 1.14-inch LCD screen that allows real-time viewing of depth maps along with color maps. DFRobot SEN0581
An ultrasonic sensor whose operation is based on the time-of-flight (ToF) principle. In addition to distance information, the sensor also generates an echo energy intensity value useful for distinguishing between different materials or surfaces. Seeed Studio 101021097
VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419
No product available!
Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 RS485/RS232