

An ultrasonic sensor measures distance by calculating the time difference between sending a signal and receiving an echo from an object. It uses echolocation to measure distances, just like a bat.
The URM07 is an ultra low-power sensor. The effect range is up to 7.5m, and it has a wide range power supply of 3.0 - 5.5V. It is directly compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi. etc. The average operating current is only 5mA and standby current is only 14uA. According to the principle of ultrasound sensors, the accuracy of the distance value will be affected by the air temperature and wind direction, so using a DFRobot URM07 built-in temperature sensor, you can read the ambient temperature, and automatically calculate temperature compensation. The sensor uses an integrated ultrasonic probe with a detection angle of approximately 60° in a compact and lightweight unit. The unit uses a 2.54mm pitch 4Pin interface, using UART communication, compatible with most common microcontrollers.
URM07 Detecting Angle
URM07 UART ultrasonic distance sensors have undertaken rigorous road testing and optimization. We guarantee that this sensor has first-class response speed, ultra high stability, the highest sensitivity and ultra low power consumption. If you have harsh environmental requirements for your sensor performance in your design, the URM07 is definitely the best choice.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Parallax PING))) Ultrasonic Sensor #28015
No product available!
The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04
No product available!
No product available!
URM04 v2.0 Ultrasonic Sensor
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. SparkFun SEN-15776
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface
A module with a distance sensor GP2Y0E03 operating in the infrared band. The sensor measures between 4-50cm.
Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2
LIDAR distance sensor with a measuring range from 5 cm to 10 m and a resolution of 1 cm. It communicates via the I2C or ANT interface. The set includes a module with Qwiic SparkFun SEN-18009 connectors
No product available!
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
No product available!
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Module with ultrasonic distance sensor HC-SR04 with a range of up to 400 cm. It communicates via the I2C interface. SparkFun SEN-15171
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
Laser distance sensor with a measuring range up to 4 m based on the ToF measurement technique. Communication with the module takes place via the I2C interface
No product available!
Ultrasonic distance sensor with a range of up to 5m. Communication takes place via the I2C interface. The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0304
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 7.65 m. It allows you to read data via the I2C interface. DFRobot SEN0274
No product available!
Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0278
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 318 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the USB interface. DFRobot SEN0279
No product available!
Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5396
DFRobot SEN0153