modUS-015 - ultrasonic distance sensor (module) up to 4m

A miniature lidar proximity sensor that detects objects up to 5 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5460

ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532

Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS

Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001

Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218

Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723

A miniature lidar distance sensor that detects objects up to 100 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5483

The GP2Y0A41SK0F sensor performs precise distance measurement in the range of 4–30 cm with an analog output signal adapted for operation with microcontrollers. It is used in robotics projects, obstacle avoidance systems, and automation devices detecting the presence of objects.

Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle

Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780

Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).

This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489