VL53L3CX Time-of-Flight Multi-Target Distance Sensor Carrier - module with distance sensor VL53L3CX (5m)

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).

The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04

Ultrasonic distance sensor determines the distance to a target by measuring time lapses between the sending and receiving of the ultrasonic pulse. This ME007YS Waterproof Ultrasonic Sensor features high accuracy, steady data output and a certain penetration power(smog, dust). SEN0312

TF Mini LiDAR is a rangefinder based on ToF (Time of Flight) technology. It consists of high-quality optical and electronic devices that ensure stability, high sensitivity and precision. Benewake TFmini-S

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 10 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0277

Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. Communicates via the I2C interface. Pololu 3417

Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4064

Distance Measuring Sensor Unit Measuring distance: 4 to 30 cm Analog output type, voltage 4.5V-5.5 V, Sharp, RoHS

Ultrasonic distance sensor (sonar) with a measuring range from 30 cm to 5 m. It allows you to read data via the USB interface. DFRobot SEN0270

ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692

Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 Analog

The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476

Laser distance sensor with a measuring range from 3 cm to 400 cm based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Adafruit 3967

A module with a distance sensor GP2Y0E03 operating in the infrared band. The sensor measures between 4-50cm.

ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532

Portable set of ToF laser scanner with a range of 40m, characterized by high resolution (9,200 samples per second) and high stability and accuracy of measurements. Seeed Studio 114090021