TOF200F - module with distance sensor VL53L0X (200cm)

Advanced 2D laser scanner (LIDAR) with a 360-degree range. It offers a range of up to 12 meters and a dead zone of 0.05 meters and a scanning frequency of 10 Hz (600 rpm), which gives a sampling speed of 5 kHz and an angular resolution of 0.72°. Seeed Studio 101090061

Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1

Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0278

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0272

Ultrasonic distance sensor module with a range of up to 4.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0311

Time-of-Flight VL53L3CX Distance Sensor Expansion Board. The set is designed to measure distances and detect gestures. Distance measurement was carried out using VL53L3CX laser sensors. STMicroelectronics X-NUCLEO-53L3A2

The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

Module with ToF distance sensor based on the VL53L0X system. It offers a range of 3 to 200 cm and communicates via the I2C interface. TOF200C

Ultrasonic distance sensor with a range of up to 5 m with an analog output The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0307

Laser distance sensor with a measuring range from 0.1 m to 40 m. Optimized for industrial applications. Benewake TF02-i

Module with a distance sensor with a range of up to 300 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4079

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19037

KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.

Ultrasonic distance sensor MB1040 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 794