

Benewake TF03-100 is a laser distance sensor with a long measuring range from 0.1 m to 100 m. It uses a wavelength of 905 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect off the subject. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor has been optimized for use in industry and in difficult weather conditions. It offers a wide range of supply voltages from 5 to 24 V, housing ensuring IP67 protection level and an analog interface with a current output range from 4 to 20 mA. The sensor can work with a very high resolution of 1 cm and an accuracy of ± 10 cm and the frequency of measurements up to 1000 Hz. In addition, it has a very narrow measuring angle FoV 0.5 °, which allows for precise point measurements.
The TF03 is used in robotics as a measurement sensor in drones and mobile robots, autonomous vehicles, but also in industry, e.g. as a sensor for analyzing traffic.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 Analog
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 RS485/RS232
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 UART/CAN
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
Single point LIDAR based on ToF (Time of Flight) distance sensor with measuring range up to 8 m with a resolution of 1 cm. Thanks to the unique optical construction it can achieve stable, accurate and very sensitive measurement. Benewake TF-Luna
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 10.64 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0282
No product available!
Ultrasonic distance sensor MB1010 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 726
Optical distance sensor in the range of 10-80 cm with an analogue output, power supply 4.5-5.5V.
Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232
No product available!
Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723
Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
LiDAR laser distance sensor that can scan the environment in two or three dimensions. Offers a range of up to 8 m for 2D measurements and 2 m for 3D measurements. It communicates via the UART interface and can be connected to a computer thanks to the supplied USB adapter. SparkFun SEN-18580
No product available!
ToF distance sensor module based on the VL53L1X system. It offers a range from 4 to 400 cm and communicates via the I2C interface
No product available!
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
No product available!
Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 Analog