DFRobot TF Mini LiDAR - ToF laser sensor
ID: 570405
5902186313545
zł211.73
Tax included
zł172.14 tax excl.
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
Description
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Thanks to this, the sensor is ideally suited for drone or other unmanned applications. It can work under the influence of 70 klux light, resistant to interference from temperature, humidity, light, electronics and air flow. A laser beam with a wavelength of 850 nm is used for the measurement. The measuring angle is 2.3 °. The supply voltage is 5 V. It can measure with a frequency of up to 100 Hz and an accuracy of up to 5 mm. Transmission of measurement data takes place via the UART serial interface.
Attention!
UART interface works with 3.3 V logic, in order to be able to use a rangefinder with 5 V logic you should use a logic converter, eg Bi-directional converter of logic levels 1.8-2.8V, 3.3-5V.
properties
- Communication interface: UART (TTL)
- Working range: 0.3 ... 12 m
- The maximum range of 10% reflectance: 5 m
- Average power: 0.6 W
- Acceptance angle: 2.3 °
- Minimum resolution: 5 mm
- Refresh rate: 100 Hz
- Accuracy of measurement: 1% (<6 m), 2% (6 ~ 12 m)
- Range unit: mm
- Wavelength: 850 nm
- Light resistance up to 70 klux
- Voltage range: 4.5 ... 6 V
- Average current consumption: 120 mA
- Size: 42 x 15 x 16 mm
- Working temperature: 0 ... 60 ° C
- Weight: 4.7 g
Included
- TF Mini LiDAR laser sensor (12m)
- TF Mini LiDAR (12m) A cable
- TF Mini LiDAR (12m) B cable
570405
Data sheet
- Interface
- UART
- Type of sensor
- ToF
- Minimum distance
- 0 cm
- Maximum distance
- 12 m
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
zł74.57
24h
Available quantity: 4
Available
Available
Other products in the same category (16)
Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792
zł248.74
24h
Available quantity: 4
Available
Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793
zł248.74
4 weeks
No product available!
Ultrasonic distance sensor MB1040 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 794
zł248.73
4 weeks
No product available!
The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04
zł5.29
4 weeks
No product available!
No product available!
No product available!
URM04 v2.0 Ultrasonic Sensor
zł134.91
24h
Available quantity: 2
Available
Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS
zł87.76
4 weeks
No product available!
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
zł8.45
4 weeks
No product available!
No product available!
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
zł28.75
24h
Available quantity: 2
Available
Available
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
zł163.11
3 weeks
No product available!
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
zł39.00
24h
Available quantity: 260
Available
Available
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259