

zł261.11 tax excl.
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786
TF Mini LiDAR is a one-way distance sensor that uses ToF (Time of Flight) technologies. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Thanks to this, the sensor is ideally suited for drone or other unmanned applications. It is resistant to interference from temperature, humidity, light, electronics and air flow. A laser beam with a wavelength of 850 nm is used for the measurement. The measuring angle is 2.3 °. The supply voltage is 5 V. It can take measurements at a frequency of up to 100 Hz. Transmission of measurement data takes place via the I2C serial interface.
A Boost PCB has been added to TFMini, thanks to which the LiDAR module can connect to the Qwiic Connect SparkFun system.
Attention!
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
RPLIDAR A2M8 R4 (LIDAR) laser scanner 360 degrees, 10 Hz, 4000 measurements / second, range up to 12 m, measurement error at the level of 0.1%, safe for eyesight. DFRobot DFR0445
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
No product available!
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 8000 measurements / second. It reaches a range of up to 12 m and a measurement error of 1%. Sparkfun SEN14756
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
No product available!
Laser distance sensor with a measuring range from 0.1 m to 12 m. Optimized for industrial applications. Benewake TFmini-i
No product available!
ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19451
A module with a distance and gesture sensor that allows the detection of objects in two axes (x and z) and the detection of simple gestures. It communicates via the I2C or UART interface. SparkFun SEN-13162
No product available!
ToF laser rangefinder. It enables detection of many objects, has a field of view of about 25 ° and is able to detect objects at a distance of up to 5 m. Communicating via the I2C interface. Pololu 3416
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
No product available!
Mini module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-19013
Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425
Expansion board equipped with VL6180 distance sensor, based on FlightSense technology. The set is designed to measure distances and detect gestures. X-NUCLEO-6180A1
Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069
The PCR radar module is equipped with an integrated antenna and a 26-pin connector compatible with Raspberry Pi. The sensor detects distance, gestures, movement, material and speed up to 2 m. SparkFun SEN-16826
No product available!
Ultrasonic distance sensor MB1200 with a range from 0 to 765 cm. It generates an output in the form of a pulse, the duration of which is proportional to the measured distance. Pololu 1650
Ultrasonic ToF (time-of-flight) rangefinder with a range of 4 cm to 1.2 meters. The sensor is able to simultaneously measure the range of several objects in its field of view. Communicates via I2C. SparkFun SPX-17271
No product available!
An industrial-grade LIDAR laser scanner that allows you to create maps of areas up to 100,000 m². It has a range of up to 40 m and a resolution of up to 5 cm. Equipped with a 9-DOF inertial navigation system
No product available!
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
No product available!
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
Ultrasonic distance sensor MB1020 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 792
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786