Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It measures the distance from an obstacle using the sonar principle, i.e. it measures the time between the transmission and return of an ultrasonic wave. The sensor performance is not affected by sunlight, spotlight, or the color of the object's surface. The sensor will be perfect for projects with small dimensions, where an accurate distance measurement with a fairly large range is required.
The sensor has outputs compatible with the popular HC-SR04 sensor, so that the example programs for HC-SR04 will also work with RCW-0001. The RCW-0001 sensor is a mini version of the HC-SR04 - it has a much smaller size and a reduced dead zone to 1 mm. The RCW-0001 can also work with both 3.3V and 5V (HC-SR04 can only be powered by 5V).
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Cables for evaluation boards, set of 10 pcs., green colour
The HC-SR04 ultrasonic sensor module is commonly used in conjunction with Arduino to precisely measure distances ranging from 2 cm to 500 cm, with a resolution of 3 mm. It is a good choice for projects in the field of robotics, automation and security systems. It works on the principle of emission and reception of ultrasonic waves. It works with microcontroller platforms such as Arduino, Raspberry Pi, ESP32 or STM32. modHC-SR04
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030
Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. Communicates via the I2C interface. Pololu 3417
Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071
Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that goes low when an object is detected. Pololu 4067
Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus
No product available!
Laser distance sensor with a measuring range from 3 cm to 400 cm based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Adafruit 3967
ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data via an industrial analog interface with a current output of 4-20 mA. DFRobot SEN0267
No product available!
Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
An ultrasonic sensor whose operation is based on the time-of-flight (ToF) principle. In addition to distance information, the sensor also generates an echo energy intensity value useful for distinguishing between different materials or surfaces. Seeed Studio 101021097
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0272
No product available!
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218
Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207
No product available!
Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001