Laser distance sensor 50m

The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.

Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560

Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that goes low when an object is detected. Pololu 4067

Laser radar based on cwToF technology and metasurface lenses, offering depth maps and IR images in 160x60 pixel resolution and a wide viewing angle of 108°x40°. Thanks to its solid-state construction, range up to 4.5 m and resistance to strong lighting (up to 60 Klux), it is ideal for applications such as robotics, obstacle avoidance systems, access control and volume measurement. DFRobot DFR1177

Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 Analog

A miniature lidar distance sensor that detects objects up to 10 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5552

ToF (Time of Flight) laser distance sensor with built-in MCU and distance measurement algorithm. The sensor can measure up to 5m with an accuracy of ±1.5 cm and a resolution of 1 mm. Waveshare TOF Laser Range Sensor

The Sharp GP2Y0A02YK0F sensor enables precise distance measurement in the range of 20–150 cm using an analog output. Its stable characteristics and ease of integration make it a popular solution in mobile robotics and obstacle detection systems.

Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19037

ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692

DFRobot SEN0153

Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle

Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780

Ultrasonic distance sensor MB1040 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 794

Ultrasonic distance sensor with a range from 3 to 350 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020010