A02YYUW Waterproof Ultrasonic Sensor (up to 4,5m)
ID: 577434
5906623406173
zł92.46
Tax included
zł75.17 tax excl.
Ultrasonic distance sensor module with a range of up to 4.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0311
Description
Waterproof ultrasonic distance sensor module with a range of up to 4.5 m. Can be powered with a voltage range of 3.3 to 5 V and is compatible with 3.3 V or 5 V devices such as Arduino, Raspberry Pi etc. The average current A02YYUW is only 8 mA, so it can be powered via the IO port of most controllers.
The ultrasonic sensor is enclosed in a waterproof and dustproof housing, which means that it will be used in difficult and humid measuring conditions. All signal processing units are integrated in the module, communication with the module takes place via the UART interface.
An example of a sensor service code is available on the manufacturer's website.
Features
- Operating Voltage: 3.3 to 5V
- Average Current: <8mA
- Blind Zone Distance: 3 cm
- Detecting Range(Flat object): 3-450cm
- Output: UART
- Response Time: 100ms
- Operating Temperature: -15 to 60℃
- Storage Temperature: -25 to 80℃
- Reference Angle: 60º
- Waterproof Grade: IP67
Beam Directionalities Diagram
Kit contains
- A02YYUW Waterproof Ultrasonic Sensor
- PH2.0-4P Connector
577434
Data sheet
- Interface
- UART
- Type of sensor
- Ultrasonic
- Minimum distance
- 3 cm
- Maximum distance
- 450 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 226
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 52
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
24h
Available quantity: 125
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
24h
Available quantity: 122
Available
Other products in the same category (16)
URM04 v2.0 Ultrasonic Sensor
zł134.91
24h
Available quantity: 2
Available
Distance Measuring Sensor Unit; Measuring distance: 100 to 550 cm; Analog output type, Sharp, RoHS
zł87.76
4 weeks
No product available!
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
zł8.45
24h
Available quantity: 3
Available
No product available!
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
zł28.75
24h
Available quantity: 2
Available
Available
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
zł163.11
3 weeks
No product available!
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
zł39.00
24h
Available quantity: 262
Available
Available
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module.
zł157.29
24h
Available quantity: 1
Available
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
zł151.39
24h
Available quantity: 3
Available
Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207
zł68.19
24h
Available quantity: 4
Available
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
zł74.57
24h
Available quantity: 4
Available
Available
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor.
zł39.52
24h
Available quantity: 1
Available
Ultrasonic distance sensor module with a range of up to 4.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0311