Laser distance sensor with a measuring range from 5 cm to 15 m. It uses a wavelength of 830 nm and the Time of Flight (ToF) technology, which means that the sensor periodically transmits a beam of infrared rays that reflect from the object. It then measures the time of flight from the phase difference and obtains the range between the device and the detected object.
The sensor offers a supply voltage range from 3.7 to 5.2 V and communication interfaces UART, I2C and IO. It can work with a very high resolution of 1 mm and an accuracy of ± 2 cm and the frequency of measurements up to 50 Hz. In addition, it has a very narrow measuring angle FoV 2 °, which allows for precise point measurements.
The module is resistant to strong light, making it suitable for outdoor use. It will be used in robotics as a measurement sensor in drones and mobile robots, but also in industry, e.g. as a sensor on a production line. Full documentation is available on the product page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
Laser distance sensor with a measuring range from 0.1 m to 12 m. Communicates via the UART or I2C interface. Benewake TFmini Plus
No product available!
Single point LIDAR based on ToF (Time of Flight) distance sensor with measuring range up to 8 m with a resolution of 1 cm. Thanks to the unique optical construction it can achieve stable, accurate and very sensitive measurement. Benewake TF-Luna
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 Analog
No product available!
Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780
No product available!
KAmodVL6180X is a module that allows to measure light intensity (ALS), distance to the object and recognition of gesture. It has an embedded voltage regulator and voltage level translators on signal lines. Thanks to this can be used in systems with 2.8...5.5V power supply voltage.
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor.
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
No product available!
Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
No product available!
Laser distance sensor with a range of 5 cm to 15 m. It has a high accuracy of ± 2 cm and a resolution of 1 mm. DFRobot SEN0524