Digital Distance Sensor - module with distance sensor, 25cm (connector on the side)
ID: 1197859
5902186322219
zł94.27
Tax included
zł76.64 tax excl.
A miniature lidar distance sensor that detects objects up to 25 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5480
Description
The miniature proximity sensor based on lidar technology enables object detection at distances of up to 25 cm. It generates a digital output signal that switches to a low state (0 V) when an object is within its field of view. Otherwise, the output remains high (equal to the supply voltage). Thanks to lidar technology, the sensor's operation is unaffected by color, transparency, or ambient lighting.
The sensor precisely measures the return time of emitted laser light pulses (940 nm), making it significantly more accurate than traditional reflective sensors. No direct contact with the object is required, which increases the durability and reliability of the entire system. The minimum detection range is less than 1 mm, allowing accurate detection of very close obstacles. Thanks to the built-in hysteresis at the detection range boundary, state switching occurs smoothly without signal chatter.
The sensor operates within a voltage range of 3 to 5.5 V, enabling easy integration with popular microcontroller platforms. Typical current consumption is 30 mA during operation and only 0.4 mA in sleep mode. The ENABLE pin allows the sensor to be switched into low-power mode. The device features a side-mounted 3-pin JST SH connector, compatible with ready-made JST SH cables, allowing for quick prototyping. Additionally, the board includes an LED indicator that lights up when an object is detected, providing visual confirmation of operation.
The sensor can be used as an alternative to photocells, light barriers, or classic touchless buttons. It is ideal for mobile robotics as an obstacle sensor or a touchless user interface component. It can also serve as a counter or presence detector in home and industrial automation. Its small size allows installation in hard-to-reach areas. With a wide temperature range and reliable design, the sensor is suitable for both prototypes and final applications. The high refresh rate (100 Hz) ensures fast reaction to changes in the environment.
Features
- Maximum detection range: 25 cm
- Minimum detection range: less than 1 mm
- Refresh rate: min. 100 Hz (every 10 ms)
- Output type: digital signal (low state when object detected, high state otherwise)
- Field of view: approx. 15° (may vary depending on conditions)
- Light source: VCSEL laser 940 nm, class 1 (eye-safe)
- LED indicator: red LED lights up when object detected
- Connector: side-mounted JST SH 3-pin (compatible with 3-pin JST SH cables)
- Optional ENABLE pin for low-power mode control
- Supply voltage: 3.0 V to 5.5 V
- Current consumption: 30 mA, 0.4 mA in sleep mode
- Dimensions: 22.9 × 8.9 × 5.6 mm
- Weight: 0.5 g
1197859
Data sheet
- Interface
- Sygnał cyfrowy
- Type of sensor
- Laser
- Minimum distance
- 1 mm
- Maximum distance
- 25 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050
zł78.06
24h
Available quantity: 1
Available
Module with a digital distance sensor with a range of up to 10 cm. It has a digital output that goes low when an object is detected. Pololu 4052
zł90.15
24h
Available quantity: 2
Available
Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054
zł90.16
24h
Available quantity: 2
Available
Module with a digital distance sensor with a range of up to 25 cm. It has a digital output that goes low when an object is detected. Pololu 4066
zł112.26
24h
Available quantity: 2
Available
Other products in the same category (16)
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
zł36.86
24h
Available quantity: 1
Available
Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317
zł97.12
24h
Available quantity: 1
Available
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
zł82.82
24h
Available quantity: 1
Available
No product available!
Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238
zł891.91
24h
Available quantity: 1
Available
Available
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
zł39.10
24h
Available quantity: 2
Available
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
zł65.19
4 weeks
No product available!
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
zł211.73
24h
Available quantity: 2
Available
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
zł119.58
24h
Available quantity: 8
Available
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
zł816.88
3 weeks
No product available!
Distance Sensor Breakout VL53L1X is a distance sensor with a range of 4m and a supply voltage of 2.6 ... 3.5V. Communication with the sensor takes place via the I2C interface. SEN-14722
zł91.39
24h
Available quantity: 1
Available
Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply
zł103.00
24h
Available quantity: 1
Available
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786
zł321.17
3 weeks
No product available!
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
zł4,644.65
4 weeks
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 10 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0271
zł794.47
4 weeks
No product available!
A miniature lidar distance sensor that detects objects up to 25 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5480