URM15 - ultrasonic distance sensor with RS485 interface (30-500cm)
ID: 1182937
5902186310766
zł442.86
Tax included
zł360.05 tax excl.
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519
Description
Ultrasonic distance sensor with a range of 30 to 500 cm and a resolution of 1 cm. It is powered by a voltage from 5 to 12 V. It allows measuring the distance to objects with a detection angle of 20° and a measurement frequency of 10 Hz. It uses RS485 interface and Modbus RTU protocol for communication and can be used with all kinds of industrial. The URM15 is equipped with a temperature compensation function and allows to reduce the influence of ambient temperature on the measurement. The sensor uses a 75 kHz acoustic wave and an ultrasonic transducer with a diameter of 40 mm. It is characterized by a relatively small measurement angle and high sensitivity. The measurement circuitry is enclosed in an IP65-rated housing, so it can be used in harsh weather conditions. Sample programs are available on the product wiki page.
Features
- Range: 30 cm to 500 cm
- Resolution: 1 cm
- Accuracy: 1%
- IP rating: IP65
- Angle of measurement: 20° ± 2° (-6dB)
- Frequency of measurement: 10 Hz Max
- Communication interface: RS485
- Communication protocol: Modbus-RTU
- Power supply: 5 to 12 VDC
- Current consumption: 350 mA
- Operating temperature range: -10℃ to 70℃
1182937
Data sheet
- Interface
- RS485
- Type of sensor
- Ultrasonic
- Minimum distance
- 30 cm
- Maximum distance
- 500 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
URM04 v2.0 Ultrasonic Sensor
zł134.91
24h
Available quantity: 2
Available
DFRobot SEN0153
zł78.71
Delivery date unknown
No product available!
Ultrasonic distance sensor with a range of up to 5m. Communication takes place via the I2C interface. The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0304
zł59.38
24h
Available quantity: 1
Available
Ultrasonic distance sensor with a range of up to 15m. Powered with the voltage from 9 to 24 V, it communicates via the RS485 interface. DFRobot SEN0310
zł966.85
Delivery date unknown
No product available!
Other products in the same category (16)
IR proximity sensor used to detect objects at a distance of 10mm to 80mm using infrared radiation. It is powered by 5 V and has a digital output. DFRobot SEN0556
zł17.60
24h
Available quantity: 3
Available
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 645 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the RS232 interface. DFRobot SEN0276
zł188.14
4 weeks
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
zł8.45
24h
Available quantity: 5
Available
Expansion board with a distance sensor ToF VL53L5CX with a matrix of 64 pixels and a range of up to 4 m. The shield is compatible with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-53L5A1
zł188.17
24h
Available quantity: 1
Available
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042
zł50.97
24h
Available quantity: 2
Available
Ultrasonic distance sensor with a measurement range of 50 cm to 1650 cm. It offers a resolution of 1 cm and has three outputs, including a voltage analogue output, an RS232 serial interface and a variable-width pulse output. SparkFun SEN-16463
zł657.63
3 weeks
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 30 cm to 500 cm. It allows to read data through one of three interfaces: variable width pulse, analog output or RS232/TTL interface. DFRobot SEN0269
zł252.91
4 weeks
No product available!
A module with a distance and gesture sensor that allows the detection of objects in two axes (x and z) and the detection of simple gestures. It communicates via the I2C or UART interface. SparkFun SEN-13162
zł124.75
3 weeks
No product available!
ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218
zł91.89
24h
Available quantity: 1
Available
Satellite board can be used for easy integration into customer devices and basic gesture detection applications.Thanks to its 2.8V regulator and level shifters, the VL53L0X satellite board can be used in any application with a 2.8 to 5V supply
zł103.00
24h
Available quantity: 1
Available
Laser distance sensor with a measuring range of up to 2 m, based on the ToF measurement technique. Communication via the I2C interface
zł29.72
24h
Available quantity: 8
Available
Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259
zł205.31
24h
Available quantity: 3
Available
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3680
zł224.39
24h
Available quantity: 2
Available
Laser distance sensor with a range of 5 cm to 15 m. It has a high accuracy of ± 2 cm and a resolution of 1 mm. DFRobot SEN0524
zł202.26
24h
Available quantity: 1
Available
Pololu Carrier for Sharp GP2Y0D810Z0F and GP2Y0D805Z0F Sensors
zł7.21
24h
Available quantity: 6
Available
LIDAR-Lite v3HP is a laser rangefinder with a measuring range of 5 cm ... 40 m. Power consumption is a maximum of 85 mA. Supply voltage in the range 4.75 ... 5 V. Class 1 laser. I2C or PWM interface. SparkFun SEN-14599
zł816.88
3 weeks
No product available!
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519