ATAVRONE - bebugger/programator AVR

Atmel AVR ONE! development tool

The AVR® ONE! is a powerful development tool for on-chip debugging and programming of all AVR32 and AVR XMEGA devices. In the future AVR ONE! will also support all megaAVR and tinyAVR devices with OCD.



Suppported debug interfaces are JTAG (IEEE 1149.1), debugWire, PDI and the Nexus (IEEE-ISTO 5001(TM)-2003) auxiliary interface for high-speed trace. Supported programming interfaces are ISP, JTAG and PDI. Interfaces with AVR32 Studio 2 and newer, and AVR Studio 4.15 and newer.

Key Features:

• Fully compatible with AVR32 Studio
• Supports debugging of all AVR32 devices
• Supports AUX trace on all AVR32 devices with AUX port
• On-board 128MB DDR-SDRAM for use as circular, linear or elasticity trace buffer
• Target operating voltage range of 1.6V to 5.5V
• Draws less than 5mA from target VTref during operation
• Supports communications clock frequency from 32kHz to 33Mhz
• USB 2.0 high-speed host interface
• Supports both MICTOR-38 connector and 10-pin JTAG connector

Content:

• AVR ONE! unit with probe
• USB cable (1.8m, high-speed)
• Mains power cable
• Power supply
• AVR ONE! test adapter with 10-pin cable attached
• Stand-off adapters (10-pin 100-mil, 6-pin 100-mil, 10-pin 50-mil, 6-pin 50-mil)
• 38-pin MICTOR connector samples
• JTAG Interface cable
• AVR Technical Library CD-ROM
• Getting Started Guide

Download:

• AVR ONE! Quick Start Guide (EVK1100)
• AVR ONE! Quick Start Guide (EVK1101)