![Pololu 1390 - Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg Pololu 1390 - Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg](https://kamami.pl/8495-large_default/pololu-1390-invenscience-i00600-torxis-servo-1600-ozin-15-sec90-deg.jpg)
![Pololu 1390 - Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg Pololu 1390 - Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg](https://kamami.pl/8495-large_default/pololu-1390-invenscience-i00600-torxis-servo-1600-ozin-15-sec90-deg.jpg)
1 632,51 zł Netto
Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg
darmowa wysyłka na terenie Polski dla wszystkich zamówień powyżej 500 PLN
Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00
Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań
Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg
The i00600 Torxis is an ultra-high-torque servo that can deliver 1600 oz-in (115 kg-cm) of torque. This monster servo is controlled via the standard radio-controlled hobby servo interface and can travel 90 degrees in 1.5 seconds. The Torxis servo’s strength makes it suitable for applications that are too demanding even for giant-scale servos, and its 0.125"-thick mounting flange and aluminum main housing make it rugged enough for the rigors of a factory environment.
The industrial-grade Torxis high-torque servos by Invenscience are available in two different gear ratios that let you select for higher power or higher speed:
The servo is powered by 12 volts DC and draws approximately 3 A at full load. All of its gears are metal for increased durability, and the 3/8" hardened output shaft is supported by two ball bearings. It is pre-configured for a 90 degree range of motion, but this can be increased by reconfiguring the embedded controller (see the Bonus Feature section below for more information). The Torxis is controlled by the standard radio-controlled (RC) hobby servo signal used by most RC receivers and servo controllers.
|
|
||
|
|
The servo includes a pre-mounted metal horn as shown in the pictures; the horn has eight 10-32 threaded mounting holes. (No mounting hardware is included.)
![]() |
Torxis servo signal and power connections. |
---|
The Torxis control signal lead is terminated with a standard “JR”-style connector. Of the three wires connected to the “JR” connector, only two are connected: ground (black) and RC PWM signal (yellow). Power is connected via the Torxis’ two separate, heavier-gauge wires.
The following video shows the i0060 Torxis servo lifting a 100 lb load as part of Invenscience’s servo cycle testing:
The Torxis servo’s power makes it suitable for ultra-high-torque applications that previously required custom feedback control systems including:
![]() |
Removing the end cap of the Torxis servo reveals a Pololu Jrk 21v3. |
---|
The Torxis servo is controlled by an embedded jrk 21v3, a highly-customizable USB motor controller that also offers serial, analog, and USB interfaces. Using the free jrk configuration utility, parameters including range, response curves, speed or current limits, and much more can be customized for your application. The jrk enables the Torxis servo to function as a USB-controlled servo while allowing the host computer to monitor and graph position, current, and other parameters in real time. For more information about these features, please see the jrk 21v3 user’s guide.
![]() |
Serwo wyposażone w metalową przekładnię i analogowe sprzężenie zwrotne. Zasilane jest napięciem z zakresu od 4,8 do 7,2 V. DFRobot SER0044
HK BMS-L560DMG+HS 1/4 Scale Digital Servo (MG) 22.3kg / .16sec / 140.5g (9038)
Serwo typu giant wyposażone w plastikową przekładnię. Charakteryzuje się dość dużą trwałością i wytrzymałością. SparkFun ROB-11881
Brak towaru
HK Turnigy TGY-5521MDHV High Voltage Metal Gear Digital Servo 24kg / 0.11sec / 60g (24577)
Serwomechanizm MG996R, metalowa przekładnia, TowardPro, RoHS
Invenscience i00800 Torxis Servo 800 oz.in. 0.75 sec/90 deg
Brak towaru
Duży serwomechanizm o wymiarach 62,8 × 32,5 × 55,9 mm i wadze 180g. Dysponuje momentem obrotowym 40kg*cm (przy napięciu zasilania 7,4V). Wyposażone w standardowe 3-pinowe złącze pasujące do większości popularnych sterowników modelarskich oraz dodatkowy pin informujący o pozycji serwa. Pololu 3446
Brak towaru
Brak towaru
Duży serwomechanizm FEETECH FT5335M to duże serwo o wymiarach 62,8 × 32,5 × 55,9 mm i wadze 180g. Dysponuje momentem obrotowym aż 40kg*cm (przy napięciu zasilania 7,4V). Wyposazone w standardowe 3-pinowe złącze pasujące do większości popularnych sterowników modelarskich. Pololu 3429
Invenscience i00600 Torxis Servo 1600 oz.in. 1.5 sec/90 deg