STM32F313CCT6
search
  • STM32F313CCT6
ID: 198969
38,04 zł
Brutto

30,93 zł Netto

ARM Cortex-M4 CPU, 256kB Flash, 40kB SRAM, 1xCAN, 3xUART, 2xI2C, 3xSPI, ADC, DAC, STM, LQFP48, RoHS

24h
Dostępny
Dostępna ilość: 10
 

Wysyłka od 50 zł gratis

darmowa wysyłka paczkomatem na terenie Polski dla wszystkich zamówień powyżej 50 PLN

 

Wysyłka tego samego dnia

Jeśli Twoja wpłata zostanie zaksięgowana na naszym koncie do godz. 11:00

 

14 dni na zwrot

Każdy konsument może zwrócić zakupiony towar w ciągu 14 dni bez zbędnych pytań

STM32F313CCT6
ARM Cortex-M4 CPU, 256kB Flash, 40kB SRAM, 1xCAN, 3xUART, 2xI2C, 3xSPI, ADC, DAC, STM, LQFP48, RoHS

The STM32F313CCT6 microcontroler is based on the high-performance ARM® Cortex™-M4 with FPU 32-bit RISC core operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). Incorporates high-speed embedded memories (256 Kbytes of Flash memory, 40 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

Features:

  • Core: ARM® 32-bit Cortex™-M4 with FPU CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floating-point unit), MPU (memory protection unit) and 90 DMIPS (from CCM)/1.25 DMIPS/MHz (Dhrystone 2.1)
  • Operating conditions:
    • VDD: 1.8V +/- 8%
    • VDDA voltage range: 1.65 to 3.6 V
  • Memories
    • 256 Kbytes of Flash memory
    • 40 Kbytes of SRAM on data bus with HW parity check
    • 8 Kbytes of SRAM on instruction bus with HW parity check (CCM)
  • CRC calculation unit
  • Reset and supply management
    • Low power modes: Sleep, and Stop
  • Clock management
    • 4 to 32 MHz crystal oscillator
    • 32 kHz oscillator for RTC with calibration
    • Internal 8 MHz RC with x 16 PLL option
    • Internal 40 kHz oscillator
  • 12-channel DMA controller
  • Four ADC 0.20 µS (up to 38 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 1.8 to 3.6 V
  • Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V
  • Seven fast rail-to-rail analog comparators with analog supply from 1.65 to 3.6 V
  • Four operational amplifiers that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V
  • Calendar RTC with Alarm, periodic wakeup from Stop
  • Cortex-M4 with FPU ETM, Serial wire debug, JTAG
  • 96-bit unique ID
198969

Cechy

Rodzina
STM32F3
Rdzeń
Cortex-M4
Częstotliwość układu
72 MHz
Pamięć Flash
256 kB
Pamięć RAM
40 kB
Pamięć EEPROM
Brak
Liczba I/O
36
Przetwornik ADC
4x 12bit
Przetwornik DAC
2x 12bit
I2C
2
SPI
3
UART/USART
5
Interfejs CAN
1
Interfejs USB
Brak
Ethernet
Brak
Obudowa
LQFP48
Napięcie zasilania
1,8 V
Temperatura pracy
-40~+85°C

Produkty z tej samej kategorii (16)