STM32F313CCT6

STM32F313CCT6
ARM Cortex-M4 CPU, 256kB Flash, 40kB SRAM, 1xCAN, 3xUART, 2xI2C, 3xSPI, ADC, DAC, STM, LQFP48, RoHS

---

The STM32F313CCT6 microcontroler is based on the high-performance ARM® Cortex™-M4 with FPU 32-bit RISC core operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). Incorporates high-speed embedded memories (256 Kbytes of Flash memory, 40 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

Features:

• Core: ARM® 32-bit Cortex™-M4 with FPU CPU (72 MHz max), single-cycle multiplication and HW division, DSP instruction with FPU (floating-point unit), MPU (memory protection unit) and 90 DMIPS (from CCM)/1.25 DMIPS/MHz (Dhrystone 2.1)
• Operating conditions:
  • VDD: 1.8V +/- 8%
  • VDDA voltage range: 1.65 to 3.6 V
• Memories
  • 256 Kbytes of Flash memory
  • 40 Kbytes of SRAM on data bus with HW parity check
  • 8 Kbytes of SRAM on instruction bus with HW parity check (CCM)
• CRC calculation unit
• Reset and supply management
  • Low power modes: Sleep, and Stop
• Clock management
  • 4 to 32 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • Internal 8 MHz RC with x 16 PLL option
  • Internal 40 kHz oscillator
• 12-channel DMA controller
• Four ADC 0.20 µS (up to 38 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 1.8 to 3.6 V
• Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V
• Seven fast rail-to-rail analog comparators with analog supply from 1.65 to 3.6 V
• Four operational amplifiers that can be used in PGA mode, all terminal accessible with analog supply from 2.4 to 3.6 V
• Calendar RTC with Alarm, periodic wakeup from Stop
• Cortex-M4 with FPU ETM, Serial wire debug, JTAG
• 96-bit unique ID

---