- Obecnie brak na stanie
Mounting Bracket for Generic Linear Actuators
This steel bracket can be used to mount the generic linear actuators to a structure. Two brackets are required for mounting each actuator.
This is the recommended bracket for mounting the generic linear actuators. The bracket also works with the Concentric LD series linear actuators, although it fits a little loosely.
The brackets are made of zinc-plated steel and come with a clevis pin and split pin for attaching the bracket to an actuator, although hardware for connecting the bracket to a frame or chassis is not included. Two brackets are required for each linear actuator.
|
|
Producent
Osoba odpowiedzialna
Brak towaru
HK NTM Prop Drive Series 35-36A 910Kv / 350W (14847)
Brak towaru
Brak towaru
Brak towaru
HK NTM Prop Drive Series 28-30A 750kv / 140w (16229)
Brak towaru
HK HK15178 Analog Servo 10g / 1.4kg / 0.09s (16257)
Brak towaru
HK HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (16272)
Brak towaru
HK Turnigy dlux 55A SBEC Brushless Speed Controller w/Data Logging (16365)
Brak towaru
Konektory Polymax 5,5 mm Gold, 10 par (20 szt.) (HK2087)
Brak towaru
Brak towaru
HK NTM Prop Drive 28 Series Accessory Pack (16719)
Brak towaru
HK HD Wing Camera 1280x720p 30fps 5MP CMOS (17200)
Brak towaru
HK Turnigy D3530/14 1100KV Brushless Outrunner Motor (18225)
Brak towaru
Silnik bezszczotkowy Turnigy D3536/6 1250KV typu Outrunner (HK18227)
Brak towaru
HK Turnigy D3536/9 910KV Brushless Outrunner Motor (18229)
Brak towaru
Silnik bezszczotkowy D3542/4 1450 kV typu Outrunner Turnigy (HK18230)
Brak towaru
Mounting Bracket for Generic Linear Actuators