- Obecnie brak na stanie
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Clear
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
|---|
![]() |
| Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Clear |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Dotykowy wyświetlacz LCD o rozdzielczości 160x128 pikseli, kontroler wyświetlacza LCD160CR (I2C lub UART i SPI). Adafruit 3498
Brak towaru
Zestaw z modułem sterownika silnika wibracyjnego DA7280 i silnikiem LRA (Linear Resonant Actuator). Umożliwia dodanie do projektu informacji zwrotnej z urządzenia w postaci wibracji. SparkFun ROB-18247
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Moduł z mikrokontrolerem RP2040 dedykowany do wyświetlaczy matrycowych z interfejsem HUB75. Pimoroni PIM584
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Zestaw AVT do samodzielnego montażu zmierzchowego przełącznika świateł. AVT1850 B
Brak towaru
Zestaw do budowy czterokołowego, zdalnie sterowanego pojazdu. Wyposażony w programowalny sterownik Arduino Uno R3 oraz zestaw czujników. Zestaw do samodzielnego montażu. modARD_02
Brak towaru
Brak towaru
Wyświetlacz LCD 2x16, 80x36mm, LED backlight (yellow/green), FFSTN
Brak towaru
Brak towaru
Płytka ZYBO Z7 (Zynq Board) to odnowiona wersja zestawu zawierającego układ programowalny z rodziny Xilinx Zynq-7000 - Z-7010. W zestawie także Voucher Xilinx Zynq SDSoC. Digilent 471-014
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Transparent Clear