- Obecnie brak na stanie

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Light-Blue
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Brak towaru
Brak towaru
Listwa zaciskowa żeńska, 3-pinowa. Raster 5,0 mm. Wysokość 15 mm. 2EDGK-5.0-3P
Brak towaru
Brak towaru
Brak towaru
Złącze żeńskie 20-stykowe proste goldpin o rastrze 2 mm. Do montażu przewlekanego THT. PB20S_2.00mm
Brak towaru
Brak towaru
Brak towaru
Komputer z procesorem Allwinner A20 Allwinner ARM® Cortex™-A7 Dual-Core 1GHz, pamięcią 1 GB RAM DDR3, która jest współdzielona z układem grafiki GPU (Mali400MP2). Banana Pi został wyposażony w złącza UART, I2C, SPI, CSI, LVDS. Udostęnia także gniazdo kart SD oraz USB.
Brak towaru
Brak towaru
Tulejka dystansowa walcowa o średnicy wewnętrznej 3.3mm i zewnętrznej 5mm, długość tulejki 6mm. Tulejka wykonana z nylonu. Zestaw zawiera 50 sztuk. Pololu 1982
Brak towaru
Przewód sieciowy Ethernet ekranowany FTP kategorii 5E zakończony wtykami RJ45. Lanberg PCF5-10CC-0025-Y
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Transparent Light-Blue