- Obecnie brak na stanie

Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid White
This expansion plate for the Rover 5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
Dagu Rover 5 chassis with Orangutan SVP robot controller and additional electronics mounted to an RP5/Rover 5 expansion plate (narrow). |
---|
![]() |
Two RP5/Rover 5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
---|
![]() |
Pololu RP5/Rover 5 wide expansion plate with a TReX Jr. and an RC receiver. |
---|
![]() |
A narrow RP5/Rover 5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your Rover 5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the Rover 5 tracked chassis.
These plates were originally designed for our now-discontinued RP5 chassis, but they are also compatible with the Dagu Rover 5. However, we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners. These plates can also be used on their own as chassis for custom-built robots.
The Pololu RP5/Rover 5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the Rover 5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm).
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid White |
![]() |
Dagu Rover 5 Tracked Chassis with Encoders |
![]() |
170-Point Breadboard (White) |
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
actionBoxS to kompaktowy, zasilany 230V sterownik WiFi, umożliwiający konfigurację i kontrolę do 30 akcji w systemach automatyki domowej
Brak towaru
Brak towaru
Brak towaru
Arduino Ethernet Rev3 WITH PoE - płytka z mikrokontrolerem ATmega328 z rodziny AVR. Płytka wyposażona jest w kontroler Ethernet WizNet5100 i moduł zasilania PoE. Dodatkowym wyposażeniem są m.in.: gniazdo kart micro-SD. A000074
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
NORP12 to organizer warsztatowy wykonany z wysokiej jakości tworzywa sztucznego, z przezroczystą pokrywą, zamykany na zatrzaski, z solidną rączką zapewniającą wygodny transport. Posiada 8 kolorowych przegródek o różnej wielkości
Brak towaru
Płytka rozszerzeń z wyświetlaczem LCD TFT 2.2" przeznaczona dla zestawów STM32 Nucleo. Może współpracować z najnowszą wersją środowiska TouchGFX 4.15.0. STMicroelectronics X-NUCLEO-GFX01M1
Brak towaru
MYIR MYC-C7Z020 to moduł komputera jednopłytkowego opartego na układzie MYC-C7Z020. Układ ten składa się z dwurdzeniowego procesora opartego na rdzeniu Cortex-A9 (667 MHz) oraz układu FPGA Artix-7. Płytka posiada 1 GB pamięci DDR3 SDRAM, 4 GB pamięci eMMC oraz 32 MB pamięci QSPI Flash. Płytka jest wyposażona liczne peryferia, których wyjścia zostały wyprowadzone na dwóch złączach 140-pinowych.
Brak towaru
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid White