- Obecnie brak na stanie

Quanum Q-2D Brushless GoPro 3 Gimbal (suitable for Nova, Phantom, QR X350 and others) (55238)
Introducing the all new Quanum Q-2D brushless camera gimbal, which is designed for use with the GoPro Hero 3 on 350 size quadcopters such as the Quanum Nova, QR X350 PRO and DJI Phantom.
When it comes to a great aerial video platform a few things are key; design, size, weight and performance. The Q-2D is a design that has been optimized from the start for proper integration, saving on size and weight and the pre-tuned controller performs just as you would expect from Quanum.
The Q-2D is one of the smallest and lightest brushless gimbals on the market. At just 84mm tall, it can clear most multi-rotor landing skids and only weighs 120g, perfect for 350 sized quad copters. Both pitch and roll can be adjusted on the fly from an R/C channel and has a huge operating voltage range of up to 28 volts.
The Q-2D is pre-tuned from the factory, requiring no setup, simply bolt on to the bottom of the Quanum Nova, QR X350 PRO or DJI Phantom, install your GoPro Hero 3 camera and you're ready to shoot professional stabilized aerial video!
Features:
– Lightweight yet duable aluminum construction
– Compact size
– Adaptable to most 350 quadcopters (direct fit for Nova, QR X350 PRO and DJI Phantom)
– Pitch and roll inputs
– Support for the GoPro Hero 3 video aux output
– Huge input voltage support (7.4~28V)
– Power supply voltage reverse connection protection and voltage compensation
– Motor drive side short circuit protection
– Initial pitch angle
– Sensitivity parameters adjustment
Specs:
Operating voltage: 7.4V~28V DC (recommended 12V, 3S lipo battery)
Work current: 200mA~500mA
Working environment temperature: -15~65C
Sensors: Three MEMS gyroscope rotor and rotor MEMS accelerometer
Maximum angular rate: 2000 deg/SEC
Maximum acceleration: 16g
Control frequency: 1000Hz
Motor drive frequency: 32kHZ (noiseless smooth drive)
Accuracy: 0.1 deg
Control Range: - 45~45 (Roll), - 135~90 (Pitch)
Applicable filming equipment: GoPro Hero 3 or iLook
Size: 100x94.5x84mm
Weight: 120g
Mounting: Upper plate adapter holes centerline 30~40mm hole to hole
Included:
1 x Quanum Q-2D Brushless Gimbal
2 x Servo leads for pitch and roll control
1 x Balance accessory for use with heavier cameras (not required for use with GoPro Hero 3)
1 x Power adapter to mini JST
*Note: User manual available for download located under the "Files" tab below.
Producent BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Osoba odpowiedzialna BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Polska sprzedaz@kamami.pl 22 767 36 20
Mark Zwoliński
Brak towaru
Brak towaru
HK RotorBits QuadCopter Kit With Modular Assembly System (KIT) (51416)
Brak towaru
Zestaw z komputerem Raspberry Pi wbudowanym w klawiaturę. Wyposażony w zasilacz, myszkę, kabel HDMI i kartę microSD 16 GB. Raspberry Pi 400 Personal Computer Kits UK
Brak towaru
Brak towaru
Adapter ToolkitRC TK41400 umożliwia rozdzielenie jednego źródła XT60 na dwa kanały złącz XT60 męskie. Ułatwia integrację z bateriami i urządzeniami RC, eliminując potrzebę lutowania i tworzenia dodatkowych przewodów. Idealny do systemów, które wymagają zasilania wielu elementów z jednego złącza.
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Asus Tinker Board S to minikomputer z wydajnym procesorem ARM Cortex A17 Quad-Core RK3288 32-bitowy 1,8 GHz. Posiada 2 GB pamięci RAM LPDDR3, zintegrowany procesor graficzny, 16 GB pamięci eMMC, port Ethernet Gigabit, Bluetooth, WiFi, HDMI 2.0 (4K), 4 x USB 2.0, 40 GPIO, złącza na kartę microSD, miniJack 3,5 mm, S/PDIF oraz złącza CSI i DSI.
Brak towaru
Zmontowany konwerter USB - 1-Wire. AVT1787 C
Brak towaru
Brak towaru
Brak towaru
Brak towaru
Wysokiej jakości filament XF-ABS do drukarki 3D o średnicy 3 mm. Na szpuli nawinięte jest 2 kg drutu.
Brak towaru
HK 55238