This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.

SEQURE T55 is a compact and efficient heating platform for electronics technicians, service engineers, and hobbyists. It provides precise, safe, and even heating, and thanks to its wide voltage range and USB-C interface, it is compatible with modern PD/QC power sources. Ideal for desoldering, preheating components, and preparing surfaces for assembly.

HT140-5.0FS tips for the SEQURE HT140 soldering iron are high-quality tips designed for precision servicing and assembly work in electronics. Thanks to their flat 5.0 × 0.8 mm profile, they are ideal for working with SMD components, offering fast heating, temperature stability, and durability.

SEQURE HT140 is an advanced 2-in-1 hot tweezers soldering iron, offering flexibility, fast heating, and wide compatibility with modern power supplies. With interchangeable tips, intelligent temperature control, and a compact design, it is suitable for both electronics repair and professional service environments where precision and reliability are essential.

Advanced flight controller designed for FPV racing, freestyle drones, and X8 configurations. The STM32H743 480 MHz processor, ICM42688P gyroscope, 16 MB Blackbox memory, and dual BEC provide high performance and extensive control capabilities. The controller supports 4–8S LiPo/LiHV power and up to eight motors. SEQURE H743 V2

Set of two HT140-4.0KS tips compatible with the SEQURE HT140 hot tweezers for soldering and removal of SMD components. Flat chisel-shaped tips with a 4.0 mm working width provide even heating of solder pads and high precision during electronic assembly and service work. SEQURE HT140-4.0KS

The 4-in-1 electronic speed controller supports 4–12S LiPo and LiHV batteries and a continuous current of up to 160 A per channel. The STM32G071 processor, AM32 firmware, telemetry, current measurement, and 16 V / 2 A BEC enable use in high-power FPV multirotors. SEQURE E160 G2 4-12S AM32

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC platforms. It supports GPS, BDS, and Galileo constellations as well as SBAS and QZSS augmentation systems, providing an output rate of up to 18 Hz and horizontal positioning accuracy of 1.5 m in open-sky conditions. SEQURE M10-122

High-current brushless electronic speed controller designed for demanding RC models, drones, aircraft, boats and vehicles. It supports 5–14S LiPo batteries, provides up to 130 A continuous current and up to 220 A maximum current, while the metal heatsink helps dissipate heat under high loads. SEQURE 14130

A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 1134W and a current of up to 45A, allowing for aggressive flights while maintaining reliability. SEQURE S2207

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC applications. It supports GPS, BDS, and Galileo satellite systems together with SBAS and QZSS augmentation systems, providing an output rate of up to 10 Hz and horizontal positioning accuracy of 1.5 m in open-sky conditions. SEQURE M10-252

The ExpressLRS 2.4 GHz receiver uses two SX1281 RF chips and two antennas in a True Diversity configuration. It supports refresh rates up to F1000Hz, 100 mW (20 dBm) × 2 telemetry power and a TCXO, providing suitable parameters for FPV drones and high-speed RC models. SEQURE ELRS 2.4GHz Dual RX & 80mm*2

Compact satellite positioning module designed for FPV drones, fixed-wing models, and other RC applications. It supports GPS, GLONASS, BDS, and Galileo, as well as SBAS and QZSS augmentation systems, providing an output rate of up to 10 Hz and horizontal positioning accuracy of 1.5 m in open-air conditions. SEQURE M10-18

High-current brushless electronic speed controller designed for drones, aircraft, boats and RC vehicles. It supports 2–8S LiPo batteries, provides up to 120 A continuous current and 150 A maximum current, while the adjustable 10 A BEC can directly power receivers, servos and other onboard electronics. SEQURE 28120 (AM32) + BEC 10A

Brushless electronic speed controller designed for FPV drones, multirotors, fixed-wing aircraft, RC boats, and RC vehicles. It supports 2-6S LiPo batteries, 70 A continuous current, DShot, PWM, OneShot, and MultiShot protocols, and motor PWM frequencies up to 128 kHz. The version includes an adjustable BEC with selectable 5 V, 6 V, 7.2 V, 8.2 V, and 12 V outputs. SEQURE SQESC 2670 AM32 + BEC

A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX

A 4-in-1 flight controller and ESC kit designed for FPV racing and freestyle drones, offering high performance and ultra-fast response times. The STM32H743-based flight controller with an ICM42688P gyroscope, 16MB Black Box, and 6 UART ports provides precise control and extensive configuration flexibility. The E70 G2 ESC with AM32 firmware supports 4-8S voltage, 70A continuous current (150A peak), and 16-128 kHz PWM frequency, ensuring smooth motor operation. The 30.5x30.5mm chassis also offers telemetry, DShot protocol support, and a stable 5V/10V power supply for video systems. SEQURE H743 V2 & E70 G2 Stack AM32

High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel and up to 150 A peak current. AM32 firmware and PWM frequency up to 128 kHz enable fast and smooth motor control. SEQURE E70 G2 AM32

A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 940W and a current of up to 37.3A, allowing for aggressive flights while maintaining reliability. SEQURE S2207 BLDC 6S 1850KV

This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.