zł52.81 tax excl.
A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX
SEQURE ELRS 2.4GHz Single RX is a compact and high-performance radio receiver designed for use in FPV drones, fixed-wing aircraft models, and RC systems, where low latency and stable connection are critical. The device operates in the 2.4 GHz ISM band, ensuring strong signal quality and high resistance to interference. With support for the ExpressLRS (CRSF) protocol, the receiver provides ultra-fast data transmission and highly responsive control. Support for refresh rates of F1000Hz and F500Hz makes it ideal for FPV racing and dynamic applications requiring minimal latency.

At the core of the module is an ESP8285 microcontroller paired with an SX1281 RF chip, ensuring stable communication and high performance. The built-in PA+LNA amplifier and telemetry power of up to 100 mW (20 dBm) provide reliable bidirectional data transmission even over longer distances. The use of a TCXO oscillator enables stable operation under varying temperature conditions, which is especially important during flights in demanding environments.
The receiver is designed with a single antenna configuration using an Ipex1 interface, allowing easy integration into compact builds. It offers two connection options: via a SH1.0-4P connector or 2.54 mm pads, providing flexibility during installation. Its small size and extremely low weight make it perfect for lightweight racing drones and space-constrained models.

SEQURE ELRS 2.4GHz Single RX is an excellent choice for users looking for a lightweight, reliable, and fast receiver for FPV and RC systems. Thanks to its high refresh rate, stable telemetry, and interference resistance, it ensures precise control and flight safety. The pre-installed firmware allows for quick setup without the need for complex configuration.
Manufacturer
Responsible person
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
6-channel transmitter (RC apparatus) 2.4 GHz Flysky FS-i6 with LCD display in set with receiver FS-IA6 with telemetry support. 6V power supply (4 x AA battery). Left-hand throttle (right-handed version). Flysky FS-i6
No product available!
6-channel transmitter (RC apparatus) 2.4 GHz Flysky FS-i6 with LCD display included with FS-IA6 receiver with telemetry support. Power supply 6 V (4 x AA batteries), throttle on the right (left-handed version). Flysky FS-i6 Mode 1
No product available!
EyeLink-RC-S1 is an integrated enterprise-class ground station with a touch screen, transmission up to 15 km and an HD camera, intended for professional applications in UAV, robotics and autonomous systems. Powered by a 10200 mAh battery and based on Android, it is a comprehensive control solution with high transmission reliability and extensive interfaces.
No product available!
A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX
The ExpressLRS 2.4 GHz receiver uses two SX1281 RF chips and two antennas in a True Diversity configuration. It supports refresh rates up to F1000Hz, 100 mW (20 dBm) × 2 telemetry power and a TCXO, providing suitable parameters for FPV drones and high-speed RC models. SEQURE ELRS 2.4GHz Dual RX & 80mm*2
The ExpressLRS 2.4 GHz receiver uses two SX1281 RF chips and two 220 mm antennas operating in a True Diversity configuration. It supports F1000Hz and F500Hz refresh rates, 100 mW (20 dBm) × 2 telemetry power and a TCXO, making it suitable for FPV drones and high-speed RC models. SEQURE ELRS 2.4GHz Dual RX & 220mm*2
The ExpressLRS 2.4 GHz receiver uses two SX1281 RF chips and two antennas measuring 80 mm and 220 mm, operating in a True Diversity configuration. It supports F1000Hz and F500Hz refresh rates, 100 mW (20 dBm) × 2 telemetry power and a TCXO, making it suitable for FPV drones and high-speed RC models. SEQURE ELRS 2.4GHz Dual RX & 80mm + 220mm
ExpressLRS receiver operating in the 868 MHz / 915 MHz bands, designed for FPV drones and RC models requiring stable communication over longer distances. It uses two SX1276 RF chips and two 120 mm antennas in a True Diversity configuration, while 50 mW (17 dBm) × 2 telemetry power and a TCXO support reliable data transmission. SEQURE ELRS 868/915 MHz Dual RX & 120mm*2
ExpressLRS receiver operating in the 868 MHz / 915 MHz bands, using two SX1276 RF chips and two 220 mm antennas in a True Diversity configuration. Telemetry power of 50 mW (17 dBm) × 2, a TCXO, and the CRSF protocol support stable communication in FPV drones and RC models designed for longer-range operation. SEQURE ELRS 868/915 MHz Dual RX & 220mm*2
ExpressLRS receiver operating in the 868 MHz / 915 MHz bands, using two SX1276 RF chips and two antennas measuring 120 mm and 220 mm in a True Diversity configuration. Telemetry power of 50 mW (17 dBm) × 2, a TCXO, and the CRSF protocol support operation in FPV drones and RC models requiring stable communication over longer distances. SEQURE ELRS 868/915 MHz Dual RX & 120mm + 220mm
No product available!
A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX