zł172.50 tax excl.
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
SEQURE SQESC 2670 is an advanced brushless motor ESC designed for a wide range of RC applications, including FPV drones, multirotors, RC airplanes, boats, and off-road vehicles. The device is powered by an efficient 32-bit STM32G071 processor running at up to 64 MHz, ensuring very fast and precise motor control. Support for PWM frequencies up to 128 kHz enables smooth, responsive operation and high drive efficiency. The use of high-current MOSFET transistors and a metal heatsink allows for effective heat dissipation.

SEQURE SQESC 2670 offers broad compatibility thanks to support for DShot (all variants), PWM, Oneshot, and Multishot protocols, enabling cooperation with most flight controllers. Automatic throttle signal detection at startup simplifies configuration and speeds up setup. The built-in protection system, including low voltage, overheating, motor stall, and overcurrent protection, enhances operational safety and protects components. A major advantage is the integrated adjustable BEC, offering output voltages of 5V, 6V, 7.2V, 8.2V, and 12V, allowing direct powering of receivers, servos, and other onboard devices.
Advanced configuration options are available via a visual programming tool, enabling adjustment of parameters such as motor timing, throttle calibration, rotation direction, and response characteristics. Additionally, the device features programmable RGB LED lighting, allowing for visual customization. Thanks to its versatility and high performance, SEQURE SQESC 2670 is an excellent choice for demanding users looking for a reliable ESC for various RC applications.
Data sheet
Manufacturer
Responsible person
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 940W and a current of up to 37.3A, allowing for aggressive flights while maintaining reliability. SEQURE S2207 BLDC 6S 1850KV
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 1134W and a current of up to 45A, allowing for aggressive flights while maintaining reliability. SEQURE S2207
A compact and powerful ESC module for BLDC and PMSM motors, ideal for racing drones and lightweight aircraft. Featuring an STM32F303 microcontroller with sensorless FOC and advanced 3-shunt current measurement, it delivers smooth operation and high efficiency. It supports 3S–6S LiPo power, currents up to 20A RMS, and PWM, UART, CAN, and I²C communication for easy integration with flight controllers. STMicroelectronics STEVAL-ESC001V1
A compact ESC module designed for BLDC motors, ideal for drones and mobile devices. Equipped with the STSPIN32F0A chip and ultra-low RDS(on) transistors, it provides efficient operation and currents up to 20A. It supports 2S–6S LiPo batteries and offers precise sensorless control thanks to BEMF detection. STMicroelectronics STEVAL-ESC002V1
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
Designed for small RC crawlers in 1/24–1/12 scale, this speed controller offers high performance and precise motor control. The device runs on ESCape32 firmware and supports DShot, PWM, Oneshot, and Multishot protocols, ensuring quick response and smooth power control. Maximum current is 50A continuous and 100A burst, and a built-in 6V/3A BEC powers the onboard electronics and servos. SEQURE ANT ESC 50A 2-3S
4-in-1 ESC for FPV drones, supporting 2-6S LiPo/LiHV voltage and up to 65A continuous current (120A peak current). Equipped with a 32-bit AT32F421 microcontroller and AM32 firmware, it provides smooth motor control with PWM in the 8-128 kHz range. It supports popular protocols such as DShot600, DShot300, Oneshot, Multishot, and PWM, and also offers telemetry functionality. SEQURE Blueson A1 6S 65A AM32
No product available!
The SEQURE E130 G2 4-in-1 ESC provides high-current motor control for demanding FPV racing and freestyle drones powered by 4–8S battery packs. Support for modern communication protocols, ESC telemetry, and AM32 or BLHeli_32 firmware makes it suitable for high-performance multirotor builds. SEQURE E130 G2
No product available!
The SEQURE E130 G2 4-in-1 130 A 4–12S ESC with AM32 firmware provides high-current control for brushless motors in FPV drones powered by 4–12S battery packs. ESC telemetry, support for modern control protocols, and the standard 30.5 × 30.5 mm mounting pattern make it suitable for demanding racing and freestyle applications. SEQURE E130 G2
No product available!
The 4-in-1 electronic speed controller supports 4–8S LiPo and LiHV batteries and provides a continuous current of up to 160 A per channel. The STM32G071 processor, AM32 firmware, telemetry, integrated current measurement, and 16 V / 2 A BEC support use in racing, freestyle, and high-power FPV drones. SEQURE E160 G2 4-8S AM32
No product available!
The 4-in-1 electronic speed controller supports 4–12S LiPo and LiHV batteries and a continuous current of up to 160 A per channel. The STM32G071 processor, AM32 firmware, telemetry, current measurement, and 16 V / 2 A BEC enable use in high-power FPV multirotors. SEQURE E160 G2 4-12S AM32
No product available!
4-in-1 electronic speed controller designed for FPV racing and freestyle drones, supporting 2–6S LiPo and LiHV batteries and continuous current up to 65 A per channel. The 32-bit controller and AM32 firmware provide fast response, smooth motor control, and PWM frequencies up to 128 kHz. SEQURE Blueson A2
High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel and up to 150 A peak current. AM32 firmware and PWM frequency up to 128 kHz enable fast and smooth motor control. SEQURE E70 G2 AM32
High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel, and uses AM32 firmware with PWM frequency up to 128 kHz. The compact 20 × 20 mm mounting pattern makes it suitable for smaller FPV builds. SEQURE E70 G1 AM32
High-current brushless electronic speed controller designed for demanding RC applications, including drones, aircraft, boats, and RC vehicles. It supports 5–14S LiPo batteries, provides up to 200 A continuous current, and uses AM32 firmware for flexible motor control. The metal heatsink supports effective heat dissipation under high loads. SEQURE 14200
No product available!
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>